Why Does The JT's Strong Arm Jack Stabilizer Kit Only Come With Six Stabilizers

Question

Question:

Why does Jts strong arms only come 6 to a pack , when with 4 Jacks there should be 8?

asked by: Ralf G

1

Helpful Expert Reply:

The JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025 only comes with 6 sets because the a majority of the weight of the trailer is supported by the axles/wheels which are towards the end of the end of the trailer, so only one stabilizer is needed at the rear stabilizers. The front stabilizers have more body to support and prevent movement for so the extra set is used to support the trailer from front-to-back and side-to-side movement.

I've attached a short video below where Conner will walk you through the installation process if you choose to complete it on your own.

expert reply by: Kevin C

1

Answer 1

I recommend to add Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2 #JSC-24 to the Rpod which will give you about 24" of height. When collapsed the jacks are 4" which is about 3/4" shorter than the other options to help…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 7

Hi Tom, I have two options to replace the electric tongue jack on your Jayco Whitehawk: Option 1: Electric Jack w/ Footplate #EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and…

view full answer...

Answer 8

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 9

I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.

view full answer...

Why Does The JT's Strong Arm Jack Stabilizer Kit Only Come With Six Stabilizers

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching