Review of AMPLock Trailer Hitch Lock - 2 Inch Trailer Hitch Pin Lock - AMP37FR Video

The Roadmaster Quiet hitch would be a great choice. You might actually need two of the Roadmaster Quiet Hitch Anti-Rattle Devices. You'll need part #RM-061-125 for the connection between your adapter and the receiver hitch, and the Quiet Hitch…

Hey Naron, the distance from the center of the hitch pin hole to the anti-rattle on the Diversi-Tech Ball Mount #DTSTBM6600-2S is right at 2 inches. I am not sure where you saw that is was 3.5 inches but that is too long.

The distance from the center of the hitch pin hole to the center of the anti-rattle pin on the Flash Silent 2-Ball Mount #DTSTBM6600-2S is approximately 1-3/4".

The distance from the center of the #DTSTBM6600-2S hitch pin hole to the center of the anti-rattle pin on top of the shank is 3-1/2".

I don't have a way to verify fit of the AMPLock Trailer Hitch Receiver Lock part #AMP37FR on a 2020 Toyota Tacoma but we can offer you this same pin with a longer usable span, the AMPLock Trailer Hitch Receiver Lock for 2-1/2" or 3"…

Thank you for the photo, and it is a good idea to verify what you have, which I can confirm for you is a 2 inch trailer hitch receiver. For a hitch lock, I highly recommend going with a stainless steel lock as it will prevent rust and corrosion, and…

The install of the Air Lift WirelessAIR Compressor System for Air Helper Springs #AL74000EZ is pretty straightforward. If you went into it with all of the right tools on hand and you were mechanically inclined I bet you could get it installed in…

For a B&W Tow & Stow 3-Ball Mount that fits a 2" hitch on your 2020 GMC Sierra 1500 Denali with MultiPro Tailgate you need the #BW64FR. This ball mount has a 2-1/2" drop and 3-1/2" rise. The #BWTS10049B is not compatible with…

The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility…

The Anti-Rattle Device and Lock, #63232, is made of chrome plated steel. It does not have an official capacity because it has a higher breaking point than a hitch or ball mount that would be used with it. I have included a link to a video showing how…

To replace the ball set of your Diversi-Tech ball mount like the part #DTSTBM6600-2S with the #DTBM28 that you referenced is pretty easy actually. Here's how you would do it. 1.Loosen the hex bolt that holds the ball platform to the ball mount…

The steel sleeve around the shank of the USA-made Diversi-Tech Adjustable Ball Mount #DTALBM6625 is not a removable component, like an adapter. It is part of the integrated locking mechanism that secures the shank in your receiver tube. This ball…