How to Decrease Movement on 2-1/2" Hitch with 2" Receiver Adapter with Bike Rack

Question

Question:

My Ram came with a sleeve that sizes down the 2.5inch receiver to 2. I just got a 2inch bike rack. But the adapter sleeve is loose and causes the bike rack to move all over the place. Does anyone know of a shim or locking kit that could keep everything motionless? Thank you.

asked by: Mark K

0

Expert Reply:

Yes! For a great option to increase the snugness of your bike rack with the hitch reducer, I recommend the Roadmaster Quiet Hitch for 2-1/2" Trailer Hitches # RM-062. This accessory will be able to tighten to provide you with the extra tightness you need to eliminate movement with your rack's shank.

I went ahead and attached a video that shows you how it attaches.

expert reply by: Bob C

0

Answer 1

I recommend using the Kuat Hitch Receiver Reducer Sleeve #KU93VR for the Thule T2 Pro XTR Bike Rack #TH83JV because it sits closer to the end of the hitch receiver so you'll have more than enough space for the AutoAttach system to work properly.…

view full answer...

Answer 2

Yes, trailer running lights and parking lights are the same circuit. So on a vehicle when you turn the headlights on there's the position on the selector right before you get to the headlights where all of the exterior lights of the vehicle come…

view full answer...

Answer 3

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 4

Hey Steve, You can definitely leave the Roadmaster Quiet Hitch for 2-1/2" Trailer Hitches #RM-062 on while towing a trailer. This device is simply a clamp to hold the ball mount securely against the inside of the receiver tube.

view full answer...

Answer 5

The Roadmaster InvisiBrake Supplemental Braking System #RM-8700 is one of the options for a braking system to allow your 2008 Smart fortwo to be flat-towed behind a motorhome or other vehicle using a tow bar like the Blue Ox Alpha #BX7380. We do have…

view full answer...

Answer 6

It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…

view full answer...

Answer 7

The holes on the Buyer's Products Bolt-On 2-1/2" Hitch Receiver #BP82FR are spread 3-1/2" vertically and 3-3/8" horizontally. And the Buyers Products 15 Ton Combination Pintle Hitch w/ 2-5/16" Ball #BP38FR has the mounting…

view full answer...

Answer 8

Yes, the Blue Ox Hitch Receiver Immobilizer II #BX88225 that you referenced can be used with a weight distribution shank like what you have.

view full answer...

Answer 9

Yes, it will. It looks like the rear rack on your Aventon Pace 500 step through e-bike stops right around the 11 o'clock position. The pivoting arms on the Saris SuperClamp HD Bike Rack item #SAR44VR will go low enough on your wheel for the…

view full answer...

Answer 10

When using a tow bar to pull your modified 2016 Jeep Wrangler Unlimited you will need a high/low adapter to reduce the height difference between it and the RV. The greatest amount of rise available comes from the two items shown on the linked page,…

view full answer...

Answer 11

Some accessories fit more loosely than others in any given trailer hitch. If you think that the receiver is getting worn out, I recommend measuring the inner opening width and height to see if it is still at 2-1/2 inches. Also check the accessories…

view full answer...

How to Decrease Movement on 2-1/2" Hitch with 2" Receiver Adapter with Bike Rack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching