Review of Kuat Hitch Adapters - Hitch Reducer - KU93VR Video

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy…

The integrated cable locks that come on the Kuat NV 2.0 Base #BA22B automatically lock when you connect the 2 ends together. When you put the key in and turn it you are actually unlocking it which is why they pop out. If you skip to the 4:15 mark…

The only camper tie-downs that wouldn't interfere with your running boards would be the Brophy Slide In Camper Tie-Downs #HSWB, which mount to the inner lip of the bedrails. You'll want to verify that these brackets will clear the…

Yes, the Brophy Hitch Reducer and Extender #HR26 has more than enough depth from the face of the receiver to the pin hole for the 1-1/2 inch requirement of your Thule bike rack.

For your situation the best solution would be a hitch extender that reduces the 2-1/2 inch down to a 2 inch hitch like with the #HR26 so that you can keep using the hitch lock/anti rattle bolt of your Thule Helium TH9043 since it puts the 2 inch…

The best option to use a bike rack such as the Thule T2 Pro XTR 2 Bike Platform Rack part #TH83JV or the Kuat NV 2.0 2-Bike Platform Rack part #NV22G on a vehicle with 2-1/2" receiver tube would be with an extension adapter rather than a sleeve…

So the answer is yes, with your 2-1/2 inch receiver you will still be able to use the Thule T2 Pro XTR Bike Rack #TH83JV. You are correct, however, that the your standard hitch reducer sleeve isn't going to work, so what you will need instead is…

Rhino Rack has aero bar roof racks that fit directly to the Lance camper shell roof tracks you have now with the part #Y02-480B-NT for a 54 inch long crossbar or part #Y02-490B-NT for 59 inch bars. This would be an easy and great option to add a roof…

The easiest way to determine which bolt you'll need is by locating which Yakima model you've got. You should be able to locate the model of rack from a sticker somewhere on the lower half of the mast or on the hitch shank-but sometimes those…

The Curt Dual 2" Receiver Tube Adapter #D-192 has a tongue weight capacity of 350 lbs for both hitch openings and the MaxxTow MT70070 has a max tongue weight of 400 lbs. You should note that the when you use a hitch extender/adapter like this…

We carry a very handy 2 inch ball mount for this exact application. The part is #D210. The ball mount slides and pins into your hitch and the top receiver will accept 2 inch bike racks and hold them above the ball. The Ball Mount has a 500 lb tongue…

Yes, the Blue Ox Hitch Receiver Immobilizer II #BX88225 that you referenced can be used with a weight distribution shank like what you have.