Gen-Y 2-1/2 and 3 inch Hitch Pin and Clip Review Video

Since the etrailer Magnetic Hitch Receiver Reducer Sleeve #e28JR fits into a 2-1/2" receiver you need to make sure the pin you're using is able to reach all the way through. Some pins made for 2" receivers can still fit the…

The Curt Rebellion XD like part #C45949-2516 and the Gen-Y Torsion 2-Ball Mount #325-GH-1124 are the two most advanced cushioned ball mounts. As far as cushioning goes the Gen-Y is the winner as it has a design that allows for more cushioning…

The Gen-Y Pin and Clips are available as part #325-GH-096 for a 2" hitch and part #325-GH-099 for a 2-1/2" hitch, but the clips are not available separately. We do have standard pins, like the Curt #C21600 which fits both options,…

With the ShockStrap Ratchet Motorcycle Tie-Downs w Shock Absorbers #297-7RSBB-M being rated for up to 1,000lbs of safe working load per strap the set of 4 is more than enough for your 4 seater side by side. If you are wanting larger straps we have…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

Weight distribution heads are adjustable to get the spring bars level or just below level with the trailer frame. Depending on the trailer frame, the head may need to be set at 90 degrees, it also may need to be tilted down as far as possible to keep…

The InfiniteRule Hitch Lock #34061073-D is for 3" Hitches and will fit your 2022 Ford F-350.

Yes! We have the exact 4" drop ball mount you need for your application. For the perfect fit, I recommend the Curt Heavy Duty Forged Ball Mount for 2-1/2" Hitch - 2-5/16" Ball #C43JR. To go along with the mount, if you need a great…

We definitely have a lock and an anti-rattle device for your Blue Ox Adjustable 2-Ball Mount - 2-1/2" Hitch #BLU85XR but since this has a solid shank we will need to use 2 pieces as opposed to a part that has them integrated together. I…

The brake controller plug is located behind the coin tray that's just to the left of the HVAC controls on your 2021 Ford Super Duty. I've shown the location with some photos, and you can also see the location in the linked installation video.…

Good question, and the hitch on your Audi is not rated for use with weight distribution, so what I recommend instead is a friction sway control set up. This will provide you with better control over your trailer to give you a much more controlled,…