Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable 2 Ball Mount - 325-GH-623 Video

The weight of the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K #325-GH-1324 is 115 lbs.

The Curt Rebellion XD like part #C45949-2516 and the Gen-Y Torsion 2-Ball Mount #325-GH-1124 are the two most advanced cushioned ball mounts. As far as cushioning goes the Gen-Y is the winner as it has a design that allows for more cushioning…

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

For your 2013 Kia Soul with a naked roof I recommend checking out the: -Rhino-Rack Vortex Aero Crossbars #RRVA126B-2, with the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars #RRRLKVA, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof…

The Gen-Y Torsion 2-Ball Mount #325-GH-1824 that you referenced does now come with set screws on the sides of the square openings to allow the movement of the ball and retainer to be reduced. I attached a picture of them for you to check out. The…

I went to our warehouse and took a couple of measurements of the part #C15800. I have attached a photo of the trailer hitch and it has the dimensions noted. It measures 7 inches from the mounting lip to the top of the receiver opening and 9-1/2…

It looks like the pin part of the DO45 (which takes the place of a standard hitch ball) has a shank with a 1-1/4" diameter so I recommend using the Curt Heavy Duty Forged Ball Mount #C45340 with a Gen-Y hitch as this ball mount has up to a 17K…

The Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs #C45908 can be latched and locked in the up position to allow you to use a standard coupler with the hitch ball. I've attached a video to assist.

The best and only option we have that covers everything you need is the Curt Pintle Hook Combo part #C45908 which fits the 2-1/2 inch hitch size, has a 2-5/16 inch hitch ball, is adjustable in height, and has a 20k capacity.

We have Gen-Y torsion style adjustable ball mounts with 21k capacities like the part #325-GH-1825 for a 3 inch hitch or part #325-GH-1324 for a 2-1/2 inch hitch.

While your Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches - Matte Black #ERT00110 will physically fit the shank of the Shocker Hitch HD Ball Mount #SHK35VR, it will also interfere with the design of the shock absorber. As…