Backing Plates And Wheel Straps For Securing Vehicles In Enclosed Trailer With E-Tracks
Question:
Do you have backing plates for the e-track? I need to secure my Honda Talon in an enclosed trailer. Im wanting to use wheel bonnets on both vehicles. The ones in there are 72inch on center which will work for the Jeep. Trailer is a 2019 ATC all aluminum car trailer. Thank you very much.
asked by: Steve S
Expert Reply:
Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 # e66RR which is a nice kit that includes 4 plates and all the necessary hardware.
For wheel bonnets to secure your Honda Talon, I recommend going with the Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs # 77314. These straps have the E-track fitting so you can use them with your current setup. This fits most tires up to 29" in diameter. Or if those won't work for you then you can simply use Erickson E-Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs # EM58523-09162-4 which includes 4 E-track ratchet straps that are 12' long each. I attached demonstration videos for you to check out.
Products Referenced in This Question
Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs
- Car Tie Down Straps
- 1 Strap
- Wheel Net
- 851 - 1200 lbs
- Erickson
more information >
Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Car Tie Down Straps
- 11 - 20 Feet Long
- E-Track Strap
- Ratchet Strap
- 1-1/8 - 2 Inch Wide
- 851 - 1200 lbs
- Erickson
more information >
Product Page this Question was Asked From
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4
- Accessories and Parts
- E-Track
- Tie Down Anchors
- E-Track Parts
- 6 Inch Wide
- Backing Plate
- 6 Feet Long
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4
- Search Results: e~track
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Video: etrailer E-Track Backing Plate with Hardware Review and Installation
- Search Results: backing plate
- Q&A: Recommended Trailer Tie Down System For Hauling Vehicles In an Enclosed Trailer
- Video: Erickson E-Track Tie-Down Kit with Ratchet Straps, Wheel Chocks, and Roller Idlers Review
- Search Results: wheel chock
- Search Results: e~track anchor
- Q&A: Tie-Down Recommendation for Bulldog Winch Ratcheting Wheel Tie-Down Strap
- Shop: Bulldog Winch Ratcheting Wheel Tie-Down Strap - Extra-Wide Tire - Vertical Mount - 3,335 lbs - Qty 1
- Search Results: e track end cap
- Video: Review of etrailer Tie Down Anchors - E Track Backing Plate 4 Pack - e66RR
- Video: Review of etrailer E Track - E-Track Rails 4 Pack - e62VR
- Shop: CargoSmart End Piece for X-Track and E-Track Rails - Qty 1
- Shop: Erickson E Track Tie-Down Anchor - 360-Degree Swivel - 2,000 lbs
- Video: Erickson E-Track Tie-Down Anchor Installation
- Video: Review of Erickson E Track - 360 Degree Swivel Tie Down Anchor - EM37JR
- Q&A: Dimensions Of Erickson E-Track Tie-Down Anchor # EM37JR
- Q&A: What is Purpose of Bumps On Mounting Flange of Erickson E-Track Tie-Down Anchor # EM37JR
- Search Results: e25vr
- Shop: Erickson Roller Idler for E Track - 3,300 lbs
- Q&A: Width Distance of Erickson Wheel Chock Kit Mounting Holes
- Article: Determining Trailer Tongue Weight
- Shop: Suspension Enhancement
- Search Results: e~track rails
- Video: Curt T-Connector Vehicle Wiring Harnes Installation - 2013 Honda Odyssey
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: What Size Bolts Do I Need For The Erickson ATV E-Track Tie-Down Kit