Draw-Tite Trailer Hitch Ball Mount Review Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Thank you for your purchase of the etrailer Trailer Hitch Receiver #e98866 for your 2014 Ford Escape. The issue you are seeing with the hitch not appearing wide enough is called "flexing" and can be an unfortunate byproduct of the what…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Looks like your 2018 Buick Regal TourX has a towing capacity of 1,000 lbs so you'd need either a smaller trailer or a larger tow vehicle to tow your trailer that weighs 1,600 lbs. The Draw Tite hitch part #36661 that you referenced is a confirmed…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

Trailer coupler height varies slightly on every trailer and every vehicle has a slightly different trailer hitch receiver height based on the hitch manufacturer. Most trailers have a coupler height between 15 and 19 inches, but there are exceptions…

We offer one hitch for your 2011 Toyota Camry Non-Hybrid SE, part #36416 from Draw-Tite. This is a Class II hitch with a 1-1/4-inch receiver opening. No 2-inch hitches are offered for your 2011 Camry. This is because hitch makers base their hitch…

The Draw-Tite trailer hitch #36416, can accommodate a 2010 Toyota Camry with dual exhaust. Take a look at the picture I have included. You can see that the symmetrical design of the hitch leaves enough room for the exhaust on both sides of the…

The Draw-Tite Class II hitch you refer to, part #36416 is indeed compatible with a 2008 Camry SE with the Dual Exhausts. I've provided a photo of the hitch once it's installed. If you'll be towing with the hitch, you'll also need a…

A 2014 Honda Odyssey with a naked roof is a rarity. The vast majority of those vans came with factory installed rails. Although there isn't a custom fit rack available, we can still get a roof rack on your Odyssey. I recommend going with the…