Draw-Tite Drawbar Review 36051 Video

For Curt trailer hitch #C12038 you will get the trailer hitch itself and the hardware needed to install it. The other parts you need depend on what you're going to use the htich for. If you're going to be carrying a cargo carrier or bike rack…

I checked your order notes and it looks like you ordered the Curt Ball Mount part #C45503 and the hitch ball part #A-82. For a standard hitch pin and clip you would want the part #F-4 or for one that would lock and give you a bit more security you…

Yes, the Fulton Fold-Away Coupler Hinge Kit part #FHDPB230101 could be installed on the tongue of the Malone EcoLight Trailer part #MAL53FR in place of the union plate that joins the two pieces of the tongue together which is pictured below. I spoke…

The Spare Tire for Malone EcoLight Trailer #MAL33FR is compatible with #MAL53FR, #MAL73FR, #MAL93FR, #MAL63FR and #MAL43FR but the trailer tongues are the same as the Retractable Tongue Kit for Malone MicroSport Trailers #MPG494 so it will fit.

Yes, the Curt Trailer Hitch Receiver #C77FR is a compatible fit for a 2024 Chevy Equinox, regardless of the trim package. This hitch has a 675lb tongue weight capacity and 4,500lb gross towing weight capacity. You'll want to verify the capacities…

I have a great solution for you to transport your Adirondack-style guide boat. While we do carry light-duty carriers that are designed to carry kayaks and canoes with built-in carriers like the Malone EcoLight Sport Trailer with V-Style Carriers for…

The Malone BigFoot Pro Canoe Carrier with Tie-Downs #MPG112MD will stay in place just fine on the Malone trailer crossbars as long as you've tightened them down properly. It's always a good idea to recheck your equipment before each trip as…

I have an answer for you. Unfortunately, we do not carry any roof bike racks that are rated with a greater maximum weight capacity than the 50-pound limit on the Inno Tire Hold II Roof Bike Rack - Wheel Mount - Clamp On #INA389. Also, even if we did…

Yes - the Thule Hull-A-Port Kayak Carrier #TH834 will fit onto your 1-1/4 inch square crossbars on the Malone EcoLight Sport Trailer #MAL53FR. The Sport Trailer also complies with the minimum crossbar spread of the Hull-A-Port (24 inches).

Though you will need to contact Roofnest about the hardware as it is not a part we currently carry, there shouldn't be an issue. From looking at the instructions, it will fit standard crossbars that are 40 inches wide with a minimum crossbar…

The Fulton Fold-Away Coupler Hinge Kit part #FHDPB230101 is what I recommend for a Malone EcoLight Trailer part #MAL53FR. The Retractable Tongue Kit for Malone MicroSport Trailers part #MPG494 will fit on the tongue but the MicroSport has a one piece…

According to our friends at Yakima, their EvenKeel will work with crossbars measuring up to 3-5/8 inches wide and 1-1/2 inches tall, so it'll work fine on the 1-1/4 inch square crossbars used on the Malone #MAL53FR EcoLight trailer you'd…