Optronics Trailer Lights - Utility Lights - UCL178RFP2B Review Video

The Optronics ThinLine LED Trailer Tail Light part #STL87RCB is a tail light but if you were instead installing the light to act as a marker light which would be its intended purpose if installed in the center of the trailer then you'd simply…

The only difference between the Optronics ThinLine LED Trailer Tail Light part #STL87RCB and part #STL87RCPG is that the latter has bullet style (removable) connectors and the former has bare wire ends.

Thank you for including images, this was a great help to me understanding what you will need to do to equip your trailer with electric brakes. The best thing for you to do is to immobilize the surge coupler. To do this you can weld the inner part of…

The GloLight LED Backup Light for Truck or Trailer #BUL111CFPG is submersible and very bright so it would work great for your boat trailer application.

To connect back up lights you need to have a 7-way trailer connector on both your trailer and tow vehicle. On a 7-way the reverse lights are powered by the center pin. To connect reverse lights to the trailer's 7-way you can use 16 gauge wire…

I went out to the warehouse and measured a Mounting Bracket for 6-1/2" Oval Trailer Tail Light - Stainless Steel Item #337LB1SS. The internal dimensions of the large oval opening are 6-3/4 inches long by 2-1/2 inches tall.

There are no white, oval LED tail lights we carry which have a curved face. We do carry the 22 diode GloLight LED Backup Light #BUL111CB which is submersible but you would need to make your own mounting spot as it is a recess mount that also requires…

I can confirm for you that each of the parts you mentioned will indeed work together: - GloLight LED Backup Light #BUL111CB - PVC Grommet #a70gb - 2-Wire Pigtail #A45CB - Mounting Bracket #337LB1 I have added some links to video reviews for you to…

According to Buyers Products, their #3371492135 Low Profile LED floodlight is not submersible. If the lamp was submerged it would be damaged. We do however have an alternative. I'd recommend using part #BUL111CB, along with the #A70GB grommet and…

The diodes are actually the only things that light up on the GloLight LED Backup Light #BUL111CB. So when they light up the ring technically lights up (see attached photo). We do have the surface mount version as part #BUL111CFPG!

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

There really isn't going to be a "typical" size for an oval exterior light, but if your light is overall 4.33" long and has 3.75" between the mounting holes then this light will work for you.