Draw-Tite Ball Mounts - Fixed Ball Mount - 36051 Review Video

While both hitches look and install very similarly, I recommend the EcoHitch Hidden Trailer Hitch #306-X7391 for your 2020 Subaru Forester over the Curt Hidden Hitch #C47HR. Both have the same towing weight capacity of 3,500 lbs, but EcoHitch…

The best trailer hitch we have for your 2019 Subaru Forester is the Draw-Tite Max-Frame Trailer Hitch Receiver part #76271. The reason that this is the best trailer hitch for you is because it is a custom fit which means no cutting or drilling is…

That's a really good question because it can be difficult to get a comparison but vehicle manufacturers sell their OEM parts just like aftermarket retailers so I was able to find the Subaru trailer hitch for a 2019 Subaru Forester, and the…

The best trailer hitch we have for your 2019 Subaru Forester is going to be the EcoHitch Hidden Trailer Hitch Receiver part #306-X7391 without a doubt. The reason for this is because the trailer hitch is almost completely hidden once installed so you…

What sets the EcoHitch #306-X7391 receiver apart from the other two options is that it's going to be completely hidden behind your bumper. The only portion that is visible is the 2 inch square receiver. So, if looks are important to you, this is…

Installing either the Curt Trailer Hitch Receiver #C47HR or EcoHitch #306-X7391 will not void the warranty of your 2021 Subaru Forester Premium as you are protected by the Federal Magnuson–Moss Warranty Act which states that unless the aftermarket…

The Curt Class I Ball Mount, part #C45018, is made for use with 1-1/4-inch hitch receivers and is rated for up to 200-lbs tongue weight (TW) and a gross towing weight (GTW) of 2000 lbs. This ball mount does not include a hitch ball or a hitch…

Here are the measurements for each of the ball mounts that you requested. I took measurements from the center pin to both ends of the ball mount. I have included images with the measurements as well. Draw-Tite Drawbar #36051 8-3/8" and…

In order to gain additional space between the bumper and the ball I recommend using a ball mount with a long shank. You would not be able to use an extender since the extender will reduce the capacity of the hitch by 50%. We do have one ball mount…

From the center of the hitch pin hole to the center of the 2-5/16" and 2" hitch balls on the Gen-Y 3-Ball Mount for 2" Hitch Receivers - 2-5/16", 2", 1-7/8" Balls #325-GH-054 measures 9-1/4", and from the center of…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…