Curt Multi-Ball Mount Review Video

First you would need an engine oil cooler kit. I recommend #D15502 because it comes with multiple thread types and has the proper O-ring size for a V-6 Toyota motor. The sandwich adapter included is thermostatic so a separate thermostat is not…

The part number 43515 is our part #33515. We have quite a few reviews on this wiring harness where our customers have said that it worked well for them. I am sure we have a similar harness by a different manufacturer that you could try. But without…

Looking online it appears the frame used on your 2002 GMC Yukon XL 2500 was also used on the Suburban 2500 and Avalanche 2500 for the model year. I do see a Curt Trailer Hitch Receiver available in a Class IV #14080 rating but there is not a class…

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could…

Since none of our extenders are a viable option (either too short or not rated high enough for weight), your best option would be to use a ball mount with a long shank. Part #325-GH-064 is rated for 21,000 lbs, fits a 2-1/2" hitch receiver,…

The Curt #C45456 has a length of 8-1/2" from center of hitch pin hole to center of ball hole. To allow you to us the Rock Tamers you have, I recommend the Gen-Y 2-Ball Mount for 2-1/2" Hitches #325-GH-064 which has a 9-1/2 inch…

Based on everything you said in your question the Cushioned Ball Mount part #AMSCV-2 should work very well for you. This ball mount is designed to work on 2-1/2 inch hitches like what you have on your 2012 GMC Sierra 2500HD and has an 18k capacity…

According to my contacts at Curt Manufacturing, the Class V hitch you are referring to, part #C15324 is compatible with the 2003-2006 Suburbans, but not the 2002 model. Curt does not offer a Class V hitch for the 2002 model, but there is a Class…

Yes, the 4-way to 7-way adapter part #37185 that you referenced does fit your 2018 Ford F-150 that has a 4-way on it currently. If you need to activate either the brake controller or 12 volt accessory wire circuit of the 7-way the wiring is present…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I…

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

In regards to the etrailer Trailer Hitch Receiver part #e75ZR for a 2023 Toyota Highlander, you must trim the underbody panel per the manufacturer. The hitch will come into contact with the panel if not trimmed. The panel however does not need to…