Tri-ball ball mount lets you tow up to 5,000 lbs with the 1-7/8" ball; 10,000 lbs with the 2" ball; or 14,000 lbs with the 2-5/16" ball. Hollow steel shank is strong and lightweight. Durable black powder coat finish resists corrosion.
Features:
Specs:
Average Customer Rating: 4.8 out of 5 stars (274 Customer Reviews)
Tri-ball ball mount lets you tow up to 5,000 lbs with the 1-7/8" ball; 10,000 lbs with the 2" ball; or 14,000 lbs with the 2-5/16" ball. Hollow steel shank is strong and lightweight. Durable black powder coat finish resists corrosion.The hitch I received fit like a glove. Now I don’t have to carry a lot of different trailer balls with me and also don’t need the receiver sleeve either. Thanks again for getting it here in a hurry.
The hitch worked great so far and I got it in good time!!
My 2 hitches came in good shape, they work like a champ.
Excellent product
Very responsive c ompany
Order was accurate and it fit as advert ised
Looks like it will hold up.
works great
Cool to follow up on your product. The multi-ball works as it should. I bought it since I didn't know if the trailer I would get would be 2" or 2 1/4. I tow a 4,000 # trailer/race car with it.
It's a heavy piece to carry around, but I feel that it will last a good many years. I did make a spacer to cram into the receiver, so the hitch doesn't rattle as much.
Otherwise it's great.
Tim E.
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Very versatile - can use it on both my vehicles that have very different hitch height. Clean welds, super solid. Weighs a LOT!
Works great used for 3 different trailer we have handy it's heavy well made.
the packaging showed up as a mess, need to see if its damaged when I open it
Fits our VW Touareg perfectly and allows us to tow a variety of things now. As can be seen in the pictures the hitch has a +5-inch gap between the bumper and the vertical adjustment pillar and the trailer itself is out further so there's enough room to get to the rear hatch and maneuver the vehicle/trailer.
I needed a hitch that I could haul my work trailer with and still drop the tailgate without dropping the trailer. I looked on etrailer and found one that would work barely but decided to call etrailer and see if anyone had any ideas. Steve answered and looked after I told him my requirements and came up with this. This has a longer distance from ball to pin by a few inches compared to the one I found so my tailgate will still drop even if I’m at an angle to my trailer or on a hill. Also with the adjustable height it’s great. Awesome hitch. Solid for a good price. ??
Hitch is a solid unit. I bought this to accommodate my 10,000lb hitch. Adjusts easily to get the right ride height. No issues with the hitch at all.
Coming in at about 45 pounds, the D900 Curt Multi-Ball Adjustable Ball Mount is a BEAST!
I purchased for use with my '08 Expedition towing either a small utility trailer w/ 1 7/8" ball or my DooLittle Bullitt cargo trailer w/ 2" ball.
I needed 5 inches of drop (at least) for both.
This is just about the only economical mount in which to accomplish this. Most if not all two ball mounts are 2" and 2 5/16" balls.
Many reviews comment on the length that this mount sticks out and initially that was a concern of mine.
Please see the Q&A of the D900 product page to address those issues.
Short story: A hollow/tubular extension shank of (about or greater)15" reduces vehicle hitch capacity by 50%.
The D900 shank and other components are SOLID steel. No reduced capacity.
Specifically in my case; this extra length will allow me some personal maneuvering room when hooked up to the DooLittle and raising the lift gate of my Expedition.
Clearance between raised lift gate and cargo trailer was about two inches using my old shank, and I should about double that.
The anti-rattle tightening bolt is a nice touch.
This is my first Etrailer purchase, but not my last.
Quaility is top notch, price is great, can't beat it. It's perfect if you need a little more distance from your hitch and your bumper. I did not get a extended A frame on my trailer and with this hitch it works great. I'm pulling a 24ft cargo trailer 10k rating.
I added 4 locking pins so I don't have to worry about anything missing.
Do you have a question about this Trailer Hitch Ball Mount?
Condition: Surface Scratches
Notes: Item has a couple minor cosmetic knicks on the large ball. Otherwise new and unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.