Curt Dual Length Ball Mount Review C45220 Video

For the weight capacity, you do not technically need a weight distribution system. However, due to the design of the trailer, I do recommend using a weight distribution system for the sway control features as the crosswinds or passing vehicles may…

I do recommend you use a weight distribution system on the Intech Explore Travel Trailer while towing with your 2018 Toyota Highlander. The reason for this is because the weight of the trailer will be over half the weight of the vehicle which is the…

I have two options for you to consider The Curt ball mount #C45220 will have a 2-3/8 inch drop and ball hole diameter of 1-inch. It's the closest to the 3-inch drop you referenced but currently there isn't any with a 3-inch drop only. The…

I spoke with my contact at Convert-A-Ball and was told that you should try to use a brass punch initially. If the Pin in the Interchangeable Ball Set, #900B, will not move with the brass punch you will need to attempt to use a harder steel punch.…

We have the Convert-A-Ball Interchangeable Ball Set #900B that has all three common hitch ball sizes of 1-7/8, 2 and 2-5/16 inch that can be swapped out and does not have a scale. I attached a review video for more info on this as well.

We do in fact have both a nickel and stainless steel version of our Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank. The nickel version is part #900b and is the more economical of the two. The stainless steel version is part #902B…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

I recommend replacing the 2" Hitch Ball #63845 if it was over torqued. By overtightening the ball you may have added microscopic cracks inside the steel that will lead to a failure in the future.

Yes. You can make connections to the battery on your 2020 Tesla Model Y in the same manner that you would on a standard, non-EV. You will need to start with a 4 way like the Tekonsha ZCI Kit #119250KIT which offers you a solution that doesn't…

Rock Tamers has a heat shield specifically for their mud flaps as the part #RT76FR which is the kit you'd want since this is the mud flap system you have. There's no reason the Access one you mentioned couldn't be used but the gap the…

I suggest using heat shields #RT76FR with the rock tamers #ERT00108 unless you have an aftermarket tip on your exhaust that makes a complete 90 behind the tire.

When installing Rock Tamer Mud Flaps, there is not an exact distance that it needs to be form the exhaust. If the exhaust on your truck is routed straight back then you will want to install Exhaust Outlets #ERT200 so that the exhaust is routed…