CargoSmart E-Track or X-Track System Dual Track Brackets Review Video

I went out to the warehouse and found that the mounting bracket for the Camco RV 360-Degree Awning Roller w/ Screen Door Slide #CAM42005 measures 3-1/16" high x 1-1/16" wide with mounting holes 7/8" apart on center. The ball has about…

We likely have some parts that can help you in regard to custom brackets, but the brackets from the CargoSmart Locking Cabinet for E-Track or X-Track Systems #3481725 are not something that can be purchased separately. I recommend taking a look at a…

It depends on how much load you will be applying to the track, what you are holding with it, and how the trailer frame is made. If you can get to the trailer frame, use nuts and bolts to attach through the floor and the metal trailer frame. If you…

You can mount the E-Track Trailer Cargo Control, #EM59150, using wood screws if the mounting surface is wood. If it is sheet metal, I would use sheet metal screws. Basically, match the screw with the material you are mounting to. There is no…

Anchoring the E-Track Trailer Cargo Control, item #EM59150, is situational so there are no manufacturer recommendations. For your situation I would recommend securing the plywood to the trailer frame in as many points as possible. Before adding extra…

For an end cap for the horizontal e-track the part #ET8730 would give the track a more finished look. You can mount the E-Track Trailer Cargo Control, #EM59150, using wood screws if the mounting surface is wood. If it is sheet metal, I would use…

With plywood walls that are as thin as yours, it's possible that they may not support what you are looking to do. The only way you will be able to utilize the Erickson Horizontal E-Track #EM59150 (2 feet) or #E19148 (5 feet) is by installing it…

The etrailer E-track 5 Gallon Bucket Holder #e26HR doesn't have a weight capacity as it's able to hold whatever your 5 Gallon bucket will hold, however I don't recommend using this to hold liquids. If you need this to stabilize a 5 Gallon…

The way you currently have the system set up will work just fine for you. However, if you want to use the 12-volt accessory feed from your 7-way to maintain (not charge) the trailer mounted winch battery, the battery would indeed need to be grounded…

The only difference between the Pro Series trailer jack #PSEA20000103 and #PSEA20000340 is the finish. The part #PSEA20000340 is zinc coated steel and the #PSEA20000103 is powder coated black. Both are corrosion resistant finishes but power coating…

There are a couple of things that you can do to get more ground clearance for your new trailer. First, if the leaf spring stack is attached under the axle then you could use an over/under conversion kit. If the trailer has a 2-3/8 inch diameter round…

Ways to raise the height of a trailer for better ground clearance include using larger wheels/tires and installing an axle over-under kit that reverses the placement of the springs and axle. An axle over-under kit (we offer two) will give you a…