CargoSmart Shelf Brackets for E Track or X Track Systems - 12" Deep - 1,000 lbs - Qty 2

See what our Experts say about this CargoSmart E-Track

• E-Track Shelf Compatible with 52 lb Battery and Smart Box
  The Brophy Utility Shelf for E-Track - 18" Wide x 10" Deep - Black # ETLSB is not rated for a certain weight, so I wouldn't trust it for your 52 lbs when traveling. Instead I recommend using the CargoSmart Shelf Brackets for E-Track or X-Track Systems - 12" Deep - 1,000 lbs - Qty 2 # 3481726 which are sturdy brackets to make a shelf compatible. This will easily hold your battery and smart box during travel. I've attached some videos to assist.
  view full answer...
• Can I use The CargoSmart Shelf Brackets On a Horizontal E-Track Running Vertically?
  I recommend installing the CargoSmart Horizontal or Vertical X-Track # 3481788 to be able to utilize the CargoSmart Shelf Brackets # 3481726. You will not be able to turn the brackets sideways to install a shelf. The mounts do not have the strength to hold a shelf in that orientation.
  view full answer...
• How To Add Shelves To E-Tracks Inside a Box Truck
  It sounds like to me that you are wanting to attach shelves to the e-tracks in your box truck. If that is the case then what we have for this is the CargoSmart Shelf Track Brackets part # 3481726 which I think is what you are looking for but if it is not please just let me know. We also have pre-made shelves that fit into the e-track, the Brophy Utility Shelf for E-Track part # ETLSB and part # ETSSB or the CargoSmart Locking Cabinet for E-Track part # 3481725.
  view full answer...
  
• Can You Build a Bed With the Erickson Vertical E-Tracks and Move It Up and Down
  It is indeed possible to build a bed using the Erickson Vertical E-Tracks like part # E19146 for example. In order to do so you will need some brackets like the CargoSmart Shelf Brackets part # 3481726 or CargoSmart Board Holder part # 348892 and some lumber. That said, you would not be able to move the bed up and down as a whole. If you did not attach the bed to the bracket then you could so in only a few pieces but since the bed would be pinned between the tracks you couldn't lift it...
  view full answer...
• Do CargoSmart Shelf Track Brackets have a Weight Rating
  I reached out to a representative of CargoSmart who told me the CargoSmart Shelf Track Brackets # 3481726 do not have a specific weight rating because there are so many variables in regards to how many brackets you are using, how far apart they are mounted and how the E-Track or X-Track system is mounted. I was told that if it was something relatively light, in the neighborhood of 100 lbs there would not be any type of issue but putting a specific rating on the Shelf Track Brackets # 3481726...
  view full answer...
• Are Brackets for CargoSmart Cabinet Available Individually
  We likely have some parts that can help you in regard to custom brackets, but the brackets from the CargoSmart Locking Cabinet for E-Track or X-Track Systems # 3481725 are not something that can be purchased separately. I recommend taking a look at a few different options: CargoSmart Shelf Track Brackets for E-Track or X-Track Systems # 3481726 or the same brackets, which are folding, part # 3481727; there are also the CargoSmart Dual Track Brackets for E-Track or X-Track Systems # 3481728. The...
  view full answer...
• How To Install E-Track Inside Of A Isuzu Refrigerated Truck
  Hey Shawn, The E-track you're wanting to install in the back of your truck is just going to need to be screwed into the studs of the walls or into the floor. You'll want some self tapping screws ( # SL99FR) or wood screws ( # SL49FR) that are just thin enough to pass through the mounting holes of the E-track # e62VR and just long enough to bite into the studs without passing completely through them. The more screws the better the hold so you can load up each hole, even if some holes are...
  view full answer...

Do you have a question about this E-Track?