Differences Between Pro Series Trailer Jack # PSEA20000103 and # PSEA20000340

Question

Question:

What is the difference between the Pro Series Round, A-Frame Jack - Topwind - Zinc Plated - 14 Lift - 2,000 lbs Item # PSEA20000340 and Pro Series Round, A-Frame Jack - Topwind - 14 Lift - 2,000 lbs Item # PSEA20000103

asked by: Thomas K

0

Expert Reply:

The only difference between the Pro Series trailer jack # PSEA20000103 and # PSEA20000340 is the finish. The part # PSEA20000340 is zinc coated steel and the # PSEA20000103 is powder coated black.

Both are corrosion resistant finishes but power coating is better in that regard so that would be what I would go with.

expert reply by: Jameson C

0

Answer 1

We likely have some parts that can help you in regard to custom brackets, but the brackets from the CargoSmart Locking Cabinet for E-Track or X-Track Systems #3481725 are not something that can be purchased separately. I recommend taking a look at a…

view full answer...

Answer 2

I looked through all of our available manual A-Frame trailer jacks and the option with the shortest retracted bracket height is the etrailer.com A-Frame #TJA-2001-B. The retracted bracket height is right at 5-1/8 inches from the ground and it has a…

view full answer...

Answer 3

The Dutton-Lainson A-Frame Trailer Jack, #DL22772 has an outer tube diameter of 2-1/4 inches. It measures 10 inches from the top of the bracket to the top of the jack. It measures 10-1/4 inches from the bottom of the bracket to the bottom of the tube…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Differences Between Pro Series Trailer Jack # PSEA20000103 and # PSEA20000340

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching