Bright Way Trailer Breakaway Kit with Switch Review Video

It looks like the Single Rocker Switch #37213685 will fit your needs. It is a 3-prong switch that has an on/off function. So it will be on when switched to the top and off when switched to the bottom. There would be no 3rd/middle stopping point.…

The Fusion LED Combination Tail Light Bar #STL264RCB appears to be the closest light we have to your current red stick light. This has the same clear lens with red LED's. It is 20-1/2" long versus the 17" light you have. We…

While I was unable to confirm who manufacturers the Defender 2 brake away system on your 2021 Big Tex 60EC. I do agree that the Bright Way Push-to-Test Trailer Breakaway Kit #3802346 does look identical minus the decal and they have the same wiring…

I did some research and it looks like the 1997 Jayco folding trailer used lug bolts that are 1/2" with a 13/16" head. The Redline wheel bolts you referenced #RG02-020, should work for your application.

Your photo of your Jayco pop-up does appear to show a corroded outer roller bearing along with your 5.70-8 tire and 4-on-4 wheel, such as #AM30153 and the similar items shown on the linked page. Your size wheel/tire is usually found on an axle…

The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer vinyl…

To charge the battery in the Engager Trailer BreakAway Kit, #20099, you can attach the wire from the 12 volt circuit on the trailer side 7-Way (1 oclock position on the back of the trailer side 7-Way where the wires attach) to the input wire on the…

The Bright Way Trailer Brakeaway Kit #3802308 has a built in 1-AMP charger. So when your truck is connected it will be charging. There should be no draw going out while the trailer is disconnected so it should be ready to rip whenever you're…

With plywood walls that are as thin as yours, it's possible that they may not support what you are looking to do. The only way you will be able to utilize the Erickson Horizontal E-Track #EM59150 (2 feet) or #E19148 (5 feet) is by installing it…

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

All of that is not necessary. All you have to do is lock out the surge coupler so it cannot move in and out or disconnect the brake lines. By removing the old coupler you would have to remove the brake lines any way. A surge coupler can still be used…

Breakaway batteries aren't typically used for powering interior lights but with a kit like the Hopkins Engager part #20099 you'd have a kit that would come with a battery charger as well. I'd recommend LED interior lights as they draw…