Bright Way Trailer Breakaway Kit with 0.5-Amp Charger and 5 Ah Battery

See what our Experts say about this Bright Way Trailer Breakaway Kit

• Does Bright Way Trailer Breakaway Kit Come With Mounting Hardware
  The Bright Way Trailer Breakaway Kit with Switch, 12V, 5-Amp-Hour Battery, and Charger # 3802339 does not come with mounting hardware; you would need to supply your own self-tapping screws from a local hardware store. If you were looking for a breakaway kit that did come with mounting hardware, I recommend the Hopkins Trailer Breakaway Kit with Built-In Battery Charger - Side Load # HM20001. This comes with self-tapping screws as well as U-bolts so you could mount it to your jack post...
  view full answer...
• Replacement Bright Way Trailer Breakaway 5 Amp Hour Battery and Charger
  We have the Bright Way Trailer Breakaway Kit # 3802339 which is the entire kit. Or we have the Battery # 3801250 and Charger # 3802349 separately if your case is not damaged. The charger maintains the charge on the battery when connected to your trailer. This ensures when the emergency brake away cable is pulled the electric trailer brakes have the power they need to stop the trailer and prevent it from rolling away.
  view full answer...
  
• What do you Recommend as a Cost Effective Trailer Breakaway Kit for my 1973 Trailblazer Camper
  There is not a thing in the world wrong with the Bright Way Trailer Breakaway Kit with Switch part # 3802339. It offers the functionality as any other break away system and is cost effective. There is a small hole where the wires run through the box that I would dab a bit of silicone on but outside of that it will be just fine. Check out the linked video my buddy Adam did on it that I linked for you.
  view full answer...
• Replacement Breakaway Pin and Cable for Bright Way Trailer Breakaway Kit
  The Bright Way Trailer Breakaway Kit with Switch, 12V, 5-Amp-Hour Battery, and Charger # 3802339 isn't a guaranteed fit with the Hopkins # HM20051. Instead I recommend using the Replacement Cable and Pin for Bright Way Trailer Breakaway Kits - 42" Long # 3802350.
  view full answer...
• Can the Breakaway Battery Be Trickle Charged During Storage
  Yes, you can charge the 12V battery on your Bright Way Trailer Breakaway Kit with 0.5-Amp Charger and 5 Ah Battery # 3802339 while in storage. If you don't already have a charger you can use the CTEK MULTI US 7002 12-Volt Universal Battery Charger w/ Pulse Maintenance and Backup Power # CTEK56353.
  view full answer...
• Triple Axle Breakaway Kit Recommendation
  We have a good solution with the the Tekonsha Shur-Set III Trailer Breakaway Kit part # 20005 but the Bright Way Trailer Breakaway Kit with Switch part # 3802339 is not rated for more than two axles.
  view full answer...
• Parts Needed To Transfer A Boat Trailer With Surge Brakes To Electric Over Hydraulic
  Since you already have a hydraulic surge brake system on your trailer it's going to be fairly easy to swap over to an electric over hydraulic system. Starting with the trailer coupler, you'll want to lockout the actuator, if possible, or replace it with a standard trailer coupler. If you need to swap out the coupler I'd just need to know the size of the channel the current one is mounted on and the GVWR of the trailer to determine the correct capacity coupler. You'll remove the brake...
  view full answer...
• How Long Will Battery of Bright Way Trailer Breakaway Kit Last
  The battery that comes with the Bright Way Trailer Breakaway Kit with Switch, 12V, 5-Amp-Hour Battery, and Charger # 3802339 is a 12 volt sealed lead-acid battery and these batteries have a life cycle that can vary quite a bit, but typically it has quite a long life of 3-5 years, which is what you should expect with this kit. The battery, for which the replacement is part # 3801250 will constantly be charged when you install it on the trailer. This kit has a charger and connects to your...
  view full answer...

Do you have a question about this Trailer Breakaway Kit?