Customers compare amp37fr to these similar products
Products Featured in this Video
What's up everybody. It's AJ with etrailer.com. Today, we're gonna be checking out the amp lock hitch lock. It's going to go right here on your ball mount or accessory, gonna run right through and lock on this side. That way nobody can mess with this when you're not around. Just want to show you what it looked like outside of the ball Mount.… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The tongue weight rating of the B and W adjustable ball mount part #BWTS20066BMP is based on which ball you use. If you use the 2 inch ball it has a tongue weight capacity 750 lb and with the 2-5/16 inch it is 1,800 lb.
view full answer...In order to lock a Demco Tow Bar like the Demco Excali-Bar III Non-Binding Tow Bar part #DM9511013 you'll need the Demco Base Plate and Receiver Lock Kit part #DM9523068 which comes with locks to secure the tow bar to the motorhome and the tow…
view full answer...Demco rates their Base Plate and Receiver Lock Kit #DM9523068 to match the weight of their tow bars like the Demco Excali-Bar III Non-Binding Tow Bar #DM9511013 which is up to 10,500lbs. As they only designed them for this single purpose you will not…
view full answer...Hey Naron, the distance from the center of the hitch pin hole to the anti-rattle on the Diversi-Tech Ball Mount #DTSTBM6600-2S is right at 2 inches. I am not sure where you saw that is was 3.5 inches but that is too long.
view full answer...There is a way for you to not only lock the B&W Tow & Stow 3-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 148K #BWTS20067BMP to your 2-1/2 inch trailer hitch, but also the ball platform to the mount, and the hitch…
view full answer...The distance from the center of the hitch pin hole to the center of the anti-rattle pin on the Flash Silent 2-Ball Mount #DTSTBM6600-2S is approximately 1-3/4".
view full answer...The distance from the center of the #DTSTBM6600-2S hitch pin hole to the center of the anti-rattle pin on top of the shank is 3-1/2".
view full answer...For a stainless steel locking hitch pin that is compatible with the 2-1/2" hitch receiver on your 2011 Chevrolet Silverado 3500 HD we have the Curt #C23519. This includes 2 keys, is 5/8" in diameter, and has a usable pin length of…
view full answer...Hitch pins like the Curt Reciever Lock part #C23519 that you referenced do not have weight ratings because they do not actually bear any weight, the key is to find one that is long enough for the hitch on your vehicle. The #C23519 has been confirmed…
view full answer...I don't have a way to verify fit of the AMPLock Trailer Hitch Receiver Lock part #AMP37FR on a 2020 Toyota Tacoma but we can offer you this same pin with a longer usable span, the AMPLock Trailer Hitch Receiver Lock for 2-1/2" or 3"…
view full answer...Thank you for the photo, and it is a good idea to verify what you have, which I can confirm for you is a 2 inch trailer hitch receiver. For a hitch lock, I highly recommend going with a stainless steel lock as it will prevent rust and corrosion, and…
view full answer...Yes, it looks like you did your math correctly! The B&W Tow & Stow 3-Ball Mount #BWTS20067BMP for a 2-1/2" receiver you were looking at is an excellent choice due to the versatility is has to offer plus it's compatible with the GM…
view full answer...