Review of B and W Trailer Hitch Ball Mount - Tow and Stow 18K 2-Ball Mount - BWTS20066BMP Video

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

The brake signal is run along with the blinker on separate wires. The passenger side is normally green and carries the right turn and brake light. The driver's side is normally yellow and carries the left turn signal and brake. The…

Yes, the perfect solution for you is the B&W Tow & Stow 2-Ball Mount #BWTS20066BMP, which is specifically designed to work with the GM MultiPro Tailgate. As you can see int the attached photo, the angled design provides clearance for the…

There is a way for you to not only lock the B&W Tow & Stow 3-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 148K #BWTS20067BMP to your 2-1/2 inch trailer hitch, but also the ball platform to the mount, and the hitch…

The B&W Tow & Stow 2-Ball Mount item #BWTS10043B weighs 40 lbs. This ball mount has a 7,500 lbs capacity with the 2" ball or a 10,000 lbs with the 2-5/16" ball. To avoid removing and reinstalling this ball mount after you're…

I have a solution for an adjustable ball mount that is compatible with the GMC MultiPro tailgate, but there is not one that has a specific 5" drop position. It appears you were looking at the B&W Tow & Stow for MultiPro Tailgates…

If you are using a hitch reducer sleeve such as the Curt #C45402 in your Ram 2500's 2-1/2-inch hitch to allow it to work with 2-inch hitch accessories, then yes you can use the B&W Tow & Stow Pintle Hook #BWTS10055 along with extra-long…

The Cargo Carrier for 2 Inch Hitches, Part #e98874, as a folding-type carrier, will tend to exhibit slightly more play than a fixed non-folding carrier. There will always be some amount of wobble with an empty carrier even with a product like this…

Hitch classifications are a general way to organize capacities but they don't reflect exact weight ratings. So while the Class V can be on somewhat higher and lower weight capacities but typically is right around 12k to 15k and for the 2-1/2 inch…

The anti-rattle hitch lock you referenced, part #SHP2040-XL does not carry a weight rating, but it is only compatible with ball mounts that have hollow shanks. Ball mounts with hollow shanks usually have a maximum capacity of 7500 lbs, so 7500 lbs…

Since you have such a light boat trailer I recommend the Curt Rebellion XD #C83WR. This will work better with the lighter amount of tongue weight that you have of 400lbs. The hitch will also be much easier to use for you as it weighs only 43lbs…

The Curt Rebellion XD like part #C45949-2516 and the Gen-Y Torsion 2-Ball Mount #325-GH-1124 are the two most advanced cushioned ball mounts. As far as cushioning goes the Gen-Y is the winner as it has a design that allows for more cushioning…