Customers compare BV0534-00 to these similar products
Products Featured in this Video
Today on enclosed trailer we'll be installing the Ventline replacement operator with knob and screw for Ventline Ventadome trailer roof vent with metal dome. Part number BV0115-04. We'll also be installing the replacement dome assembly for the Ventline Ventadome trailer roof vent. Part number Bv0534-00. Now you'll need to first take apart the interior portion of the vent. There's four screws that… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Pollak switch part #PK34513 that you referenced would be a great option, but I'd rather recommend you go with the Buyers Products Toggle Switch with 2 Blade Terminals - Recessed Panel Mount #337SW911 as this setup was made for your exact…
view full answer...The outside diameter of the outer tube of the Lippert Components Venture Actuator and High Speed Slide-Out Motor #LC168956 that you referenced is 2 inches. I confirmed this with Lippert and attached a dimensional picture of this for you to check out…
view full answer...It looks like your Sundowner roof vent is a standard 14 x 14-inch size with a continuous-type hinge. For such a vent we offer the Ventline Vent Cover for Old Style Rounded Dome Trailer Roof Vents #BV0554-03 (smoke) and #BV0554-01 (white). We also…
view full answer...It sounds like you need a replacement roof vent lid. The VD0434 part is actually the screen. The smoke colored lids we have to fit the standard size roof vents are #BVD0449-A03 and #BV0554-03. The latter of the two has the old style round dome. The…
view full answer...You actually would want shorter shackles for additional lift and then a taller equalizer would help as well. For as much of a lift as you are wanting I would recommend you get hangers that are about 1-1/2 inches longer though, since you want your…
view full answer...You could use a taller equalizer but you would also need to use taller front and rear hangers as well. Everything will have to be raised equally so if you go up 2 inches in one spot you have to go up 2 inches in all spots. If you do not raise it at…
view full answer...In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…
view full answer...The distance between the bolt holes for the Replacement Lift Arm #FVK8011-05 is 2-15/16" on center. The arm itself measures 6-5/8" long. I have attached some pictures for you to reference as well.
view full answer...The wireless camera I recommend going with is the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen #FOS05TASF. This is the system that is prewired on most trailers so it is a very simple installation.
view full answer...Vent lids are actually very universal so since you have the standard vent measurements and a continuous hinge you can definitely use either part #BV0554-01 or part #BV0534-00 depending on which style you like better. I have attached installation…
view full answer...We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…
view full answer...Thanks for the photo and based on that it looks to me like you may have had a continuous hinge and would need the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White #BV0554-01, though you are going to want to confirm this is…
view full answer...