Ventline Ventadome Trailer Roof Vents Replacement Operator Knob and Screw Review Video

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The outside diameter of the outer tube of the Lippert Components Venture Actuator and High Speed Slide-Out Motor #LC168956 that you referenced is 2 inches. I confirmed this with Lippert and attached a dimensional picture of this for you to check out…

It sounds like you have the Ventline Ventadome Roof Vent w/ 12V Fan #V2119-601-00. This Ventline roof vent has a powered lift arm assembly. The correct arm assembly replacement that you would need would be the Replacement Operator, Knob and Screw…

The Replacement 12V DC Motor #BVD0218-00 is the correct motor for your Ventline V2394 Fan in your 2005 Lance 1181 camper. If your fan blade is also damaged you will need the Replacement Fan Blade #BVD0215-00.

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement screen #BVD0434-31, the replacement lid #BVD0449-A01, and the replacement ceiling…

We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part #BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would…

Thank you so much for that information and we have exactly what you needed. I contacted Dexter and they told me that for your 3,500 lb axle with a #84 spindle you will need the following parts: - Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z…

I checked with Ventline and they longer provide the Replacement Spring Clip for Ventline Ventadome #VD0453-00vd0453-00 spring clip and we no longer sell them either. That said a full replacement lid like the Replacement Dome for Ventline Ventadome…

For a trailer with a 3,200 GVW, you most likely have a 3,500 lb axle, which is typically 2-3/8 inches in diameter. If this is the case, you would want to use part #K71-384-00. The Over-Under Conversion Kit you referenced is designed for 3 inch…

When it comes to a 205/75R14 trailer tire like the Kenda, #AM10234, this size of tire will fit a 5", 5-1/2", 6", or 6-1/2" rim. I spoke with our in-house tire expert and he said that when it comes to choosing a rim for a trailer…

What you've got there looks like some type of proprietary mount that we don't offer. We do however have jacks that would work. I'd recommend having the mount removed and using a weld-on jack like the Fulton #FXP100W0301 and the #P9012-00…