MaxxTow Ball Mount Review - 2009 Dodge Ram Pickup Video

I may have a solution for your situation, but we do not offer a ball mount with an accessory receiver for 1-1/4 inch trailer hitches. These types of ball mounts are only available for 2 inch trailer hitches. Instead, I recommend looking into a roof…

The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise #RM-077-8 is made to allow you to tow as well as use an accessory. It will allow you to flat tow up to 10,000 lbs and will allow a tongue weight of 400 lbs. The other dual receiver options…

The tongue weight capacity of your trailer hitch will be reduced by 50 percent if you put a bike rack in the MaxxTow hitch adapter part #MT70066 but not the overall trailer weight towing capacity. So your hitch would still have a 5,000 lb towing…

You are correct in that it will not work for you to tow your popup camper with the MT70070 dual hitch. In order to carry your hitch mount bike rack while towing your camper, you will want to use something like the MaxxTow Ball Mount with 2 Inch…

I couldn't recommend the use of the #RM-077-8 with your 12 inch extender as that would be way too long, but it's possible that this by itself would work for you. You'd end up with an extension of 10-3/4 inches instead of the 12 you have…

The MaxxTow Multi-Purpose Ball Mount #MT70066 does have 3-1/4-inches of rise and the similar Curt part #D210 offers only a little bit more clearance, 3-9/16-inches. On items like these the top receiver opening cannot be too much higher than the ball…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

Hello Steve. I do have a good solution for you, but I cannot recommend using the Malone Adapter #MPG544. Since it is rated for towing only 4,000 lbs, your 8,000 lb towed vehicle would be double the max towing capacity. You are right about there being…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…