MaxxTow Ball Mount Review - 2013 Kia Sportage Video

The tongue weight capacity of your trailer hitch will be reduced by 50 percent if you put a bike rack in the MaxxTow hitch adapter part #MT70066 but not the overall trailer weight towing capacity. So your hitch would still have a 5,000 lb towing…

We've pulled one of the #MT70066 ball mounts from stock and got the measurement for you. The lateral distance between the hitch pin hole in the shank and the rear of the top receiver is 5 inches. I've shown this dimension, and others in the…

You are correct in that it will not work for you to tow your popup camper with the MT70070 dual hitch. In order to carry your hitch mount bike rack while towing your camper, you will want to use something like the MaxxTow Ball Mount with 2 Inch…

The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise #RM-077-8 is made to allow you to tow as well as use an accessory. It will allow you to flat tow up to 10,000 lbs and will allow a tongue weight of 400 lbs. The other dual receiver options…

I may have a solution for your situation, but we do not offer a ball mount with an accessory receiver for 1-1/4 inch trailer hitches. These types of ball mounts are only available for 2 inch trailer hitches. Instead, I recommend looking into a roof…

Yes the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184 that you referenced would fit the top of the HD bars or the Overhaul HD rack.

The MaxxTow Multi-Purpose Ball Mount #MT70066 does have 3-1/4-inches of rise and the similar Curt part #D210 offers only a little bit more clearance, 3-9/16-inches. On items like these the top receiver opening cannot be too much higher than the ball…

I couldn't recommend the use of the #RM-077-8 with your 12 inch extender as that would be way too long, but it's possible that this by itself would work for you. You'd end up with an extension of 10-3/4 inches instead of the 12 you have…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…