Curt Multipurpose Ball Mount Review Video

We carry a very handy 2 inch ball mount for this exact application. The part is #D210. The ball mount slides and pins into your hitch and the top receiver will accept 2 inch bike racks and hold them above the ball. The Ball Mount has a 500 lb tongue…

We have actually reached out to Roadmaster and verified that the Dual Hitch Receiver #RM-077-4 can indeed be used with a tow dolly. As long as you stay under it's 400 pound tongue weight capacity this is a perfect solution for you. I have…

On the MB Sturgis Sturgi-Stay T-Fitting for POL Valve part #103537-MBS it does provide two connection points for accessories to be used. I see the confusion in the wording though. It will connect directly between the on board propane tank and the gas…

There is not a way to attach a sway bar tab to that ball mount, or a way to use a bike rack and weight distribution with an adapter. If your 2023 Kia Telluride has a roof rack you can use a roof-mounted rack like the Yakima FrontLoader #Y02103.…

Roller #RM-050 is a good option for a Class III trailer hitch on your 2006 Honda Odyssey. It does hang down lower than the hitch receiver so it will actually make contact with the ground sooner than if the roller were not on it. This roller will not…

When we installed and reviewed the Yakima Holdup Evo part #Y02479 we found that there was 8 inches from the pin hole to the nearest portion of the rack when folded up so this would work for you to clear the spare of your 2016 Jeep Patriot. If you…

I do have an option for you but the angle piece from the Swagman Traveler XCS S64664 would not allow you to carry a bike rack and cargo rack at the same time. If you were able to make it work it would be very unsafe. I recommend to use the Malone…

The simple answer to this is going to be no, because trailer connections adhere to an industry standard in order to ensure compatibility between different manufacturers and for end user convenience. Trailer connector adapters like the current…

The Yakima HoldUp EVO 2 Bike Platform Rack part #Y02479 has a built-in shank rise as well as a slight tilt which are both features desinged to improve ground clearance on vehicle's with low hitch heights such as your 2018 Volvo XC90. Therefore,…

There may be a solution for you but the Roadmaster dual receiver you mentioned is designed for flat towing only and should not be used for towing a camper. The only real option is the Malone 2" Dual Purpose Hitch Receiver #MPG544 which measures…

The Curt Dual 2" Receiver Tube Adapter #D-192 has a tongue weight capacity of 350 lbs for both hitch openings and the MaxxTow MT70070 has a max tongue weight of 400 lbs. You should note that the when you use a hitch extender/adapter like this…

There are a couple reasons you cannot drill a hole in the Curt Multipurpose Ball Mount, part #D210. First, you would void any warranty for the mount and probably the accessory you want to use with the ball mounted in the #D210. Secondly, the top…