Roadmaster Hitch Adapters - Hitch Extender - RM-077-8 Review Video

The Blue Ox has a life expectancy of 8-10 years, Blue Ox does recommend replacing it at this point. There are a few big differences between the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights - RV Mount - 8K #RM-676 and the Blue…

The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise #RM-077-8 is made to allow you to tow as well as use an accessory. It will allow you to flat tow up to 10,000 lbs and will allow a tongue weight of 400 lbs. The other dual receiver…

The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise #RM-077-8 has a towing capacity of 10,000 lbs but the tongue weight is limited to 400 lbs. As long as the tongue weight of your loaded tow dolly and whatever accessory you put in the…

If the base plate Item #RM-521453-4 did not come with thread locker then we recommend using red loctite Item #LT37420. The instructions will tell you what thread locker to use. I have found the if it is not in the kit it will be red. As far as the…

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike retaining hook…

The Hollywood Racks Sport Rider SE Bike Rack part #HLY84FR is the new updated model and the one you're looking for.

I don't have a way to add a second receiver to the Blue Ox Adjustable Drop Hitch Receiver Adapter part #BLU28XR but if you like the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers part #325-GH-214 option, there's another more cost…

The Roadmaster Dual Hitch Receiver Adapters like part #RM-077-10 or any of the other adapters I have attached for you in the link below can be flipped so that raised receiver tube is on the bottom with the tow bar or so that the raised receiver tube…

The short answer is anywhere that you can! You may need to get some short cables to wrap around each frame rail then hold them together with quick links and attach the safety cables from the RV to the quick links. Set #BX88208 is a great option…

Yes, you can install a flat-tow wiring harness along with a trailer tow wiring harness on a Jeep Wrangler without issue. For a trailer wiring harness I recommend the T-One Vehicle Wiring Harness part #118786 and for the flat-tow wiring harness I…

Since the receiver height and the base plate height of the vehicle is the same, you won't need to worry about keeping the tow bar level. If your bike rack has an angled shank with a couple inches of rise to it, you could use the #RM-077-6. If the…

The vehicle side of the Lock N Roll Articulating Trailer Hitch #336VS501 can be locked to the vehicle's 2-inch receiver hitch using any standard pin lock such as #e98880. The mating part that bolts or welds on to the trailer #336TS508 will only…