Curt Push-To-Test Trailer Breakaway Kit Installation - 2020 Grand Design Momentum 5W Toy Hauler Video

The most common method for attaching the cable for a breakaway kit like the Curt Push-To-Test #C52042 that you referenced is feeding it through the safety chain loop on the trailer hitch. The warning message that you mentioned on the instructions…

Typically, any melted wires are an indication of a short in the wiring. You will need to check the wiring of your breakaway system, and look specifically at the wiring that connects to the battery. Look for any signs of damage or pinched or cut wires…

A breakaway kit can be wired in one of two ways to the trailer brake system. The first way would be to use the Engager Trailer BreakAway Kit with Charger and Tester, item #20099 , and splice off of the power wire that maintains the trailer's…

If the light bulb is disconnected from the socket, there should not be any continuity between the running lights (brown wire) and the ground (white wire). It sounds to me as if you may have a shorted or pinched wire somewhere along in the…

We have a good solution with the the Tekonsha Shur-Set III Trailer Breakaway Kit part #20005 but the Bright Way Trailer Breakaway Kit with Switch part #3802339 is not rated for more than two axles.

The overall dimension of the Curt Push-To-Test Trailer Breakaway Kit part #C52044 are 6-1/2" long x 4-3/4" wide x 5" tall. I have attached a review video for you which showcases all of these dimensions.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Unfortunately not all trailer manufacturers will use a standard wiring color code but we still can help you determine what to do with the wires of your trailer. First we need to identify what all of the functions of your wires are. To do this…

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

Since your trailer doesn't use standard colors for it's wiring for lighting and braking you are going to have to wire in the breakaway kit #C52042 by function instead of by color. I won't be able to tell you which color is which on your…

If you didn't have a battery used with your breakaway system there'd be nothing to power the brakes in the event of a disconnect so you couldn't use just a switch like the part #FA80-00-2040 by itself. You'd instead need to use a…