Trailer Brake Controller Installation - 2012 Ford F-150 22292 Video

Since your 2012 Ford F-150 did not come with the factory to package, the blue wire for the electric brake output can be located at the manufacturers connector in the engine compartment on the drivers side near the firewall. You will notice a dark…

For your 2016 Ford F-150 if your trailer does not have brakes all you would need is the part #37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the #37185 and the install harness part #22292. If you…

If you have a factory 7-way all you will need to install a Tekonsha brake controller would be a Tow Ready Plug-In Wiring Adapter #22292 that you referenced. If you have a 4-way you will also need a Tow Package Vehicle Wiring Harness #118247. This…

As long as you have a wiring harness like the Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers #331-TPH-007, I recommend making sure that all of the pins on your receiving connector are all connecting with the controller…

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

Brake controller wiring harness #22292 plugs into the built-in connector beneath your vehicle's dashboard. To access this connector, first locate the instrument cluster finish panel in the center of you dash, near the driver's side. Carefully…

For your R-pod travel trailer, the biggest issue you will face is sway , so I recommend he Strait-Line Weight Distribution System w Sway Control - Round Bar - 10,000 lbs GTW, 600 lbs TW #RP66086 which is rated for total tongue weight between 200 and…

For the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4135K, the battery positive lead is connected to the red lead coming out of the back behind the DC fuse board. You may connect the refrigerator to…

If your 2011 Ford F-150 came with a factory installed 7-Way trailer connector or even a factory 4-Way trailer connector then you can plug in a brake controller using the proper wiring harness. For a controller I recommend the P2 #90885 because…

The plug on a 2013 Ford F-150 to plug in a brake controller wiring harness is hidden pretty well. You actually have to temporarily remove a panel from the center console to access it. Wiring harness #22292 is the correct wiring harness for you truck.…

You will not have to have a Ford dealer activate the brake controller on your 2015 Ford F-150. You just need the proper wiring harness to plug the P3 #90195 into your truck. The proper harness is #22292. If you also need the mounting bracket for the…

To convert the factory 4-Way flat trailer connector on the back of your 2010 Ford F-150, you will need Adapter 4 Pole to 7 Pole and 4 Pole, #37185. You will plug the factory 4-Way into the back of the adapter and hardwire the remaining 4 wires. The…