Review of InfiniteRule Ball Mounts - Hitch - 34061075-D Video

There is indeed a B&W Tow & Stow ball mount that gives up up to 4-1/2 inches of drop and works with your GMC MultiPro tailgate; what you need is the following part number: - B&W Tow & Stow 2-Ball Mount - MultiPro - 2" Hitch -…

The B and W Tow N Stow Ball Mount part #BWTS10038B that you referenced would be what I would recommend. This comes with the two more popular ball sizes of 2 inch and 1-7/8 inch which are more common on lighter duty trailers and has ability to do up…

The B and W Tow n Stow part #BWTS20048B has two pin holes. The closest pin hole the ball center measures 9-1/4 inches whereas the further pin hole measures 10-3/8 inches.

Hitch pins don't actually bear any of the weight of the trailer so they are not rated for trailer weight like what you are referencing. The tongue weight of the trailer pushes so hard down on the hitch tube that it binds it up in the hitch…

Our hitch locks like the etrailer #e98881 would easily handle the weight of a 7,500 lb trailer. In general they aren't weight rated though as they don't end up carrying the weight like you might think they do. The tongue weight of the trailer…

Correct, the B&W Tow & Stow 2-Ball Mount part #BWTS20066BMP would not work with Rock Tamers Heavy-Duty, Adjustable Mud Flap System part #ERT00110 as there is not enough room on the shank. I don't think there's a ball mount that does…

The B&W Tow & Stow 3-Ball Mount part #BWTS30048B is designed for a 3" receiver tube opening therefore if this is what you have on your 2006 Ford F-250 then yes, it will work for you. However, if I had to guess I would say that you have a…

There is one lock set I really like the most that is going to give you the best overall protection for the 15,000 lb capacity Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls #C83WR: - InfiniteRule Lock Set…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount part #C83WR won't work with a weight distribution system due to the design of the adjustable shank but we do have a very similar option that will, the Gen-Y Torsion Weight Distribution…

The Curt Rebellion XC cushioned ball mount part #C83WR would cushion the ride quality and reduce the movement you are experiencing but an easier and most cost effective solution would be an anti-rattle device like the etrailer #e99007 which will lock…

I reached out to Curt who stated at this time the cushioning material inside the Rebellion XD Shock Absorbing Adjustable Ball Mount #C83WR is not replaceable. They have tested the Rebellion to having more than 1 million cycles and the cushioning did…

The SureCall Fusion2Go Max Cell Phone Signal Booster for Cars and Trucks #SC53MR is not limited to just inside the vehicle. That being said, the signal booster range is more limited (a few feet from the antenna). If you are directly outside the…