InfiniteRule B and W Tow and Stow Ball Mounts Locking Pins Review Video

The Curt Front Mount Trailer Hitch Receiver #C52NR will fit your 2024 GMC Sierra 2500 AT4 but you will need to trim the rock guard in order for the hitch to fit.

In regards to the Curt Front Mount Trailer Hitch Receiver part #C52NR which is a fit for a 2022 GMC Sierra 2500, the tow hooks do not need to be removed. I have attached a photo below which shows both the trailer hitch and tow hooks in place. I…

If you want to totally lock the B&W Tow & Stow 3-Ball Mount #BWTS10048C you would need a lock set that locks the shank to the hitch and locks for the platform then to the shank with the InfiniteRule Locking Pins #34061775-D.

It's the same harness for both. That's just how its categorized on our website. To add a 7-way to your 2023 Ford Ranger you will want the Curt T-Connector Vehicle Wiring Harness item #C56431. This custom-fit T-connector plugs into…

Yes, we do have a Shocker Hitch that will work great with the Curt Hitch item #C13417 on your 2023 Ford Ranger. It is the Shocker Hitch Air Cushioned Ball Mount item #SHK89VR. This cushioned ball mount has a 10,000 lbs capacity and comes with a…

We do have locking pins for the B and W Tow n Stow ball mounts like with the InfiniteRule Locking Pins for B & W Tow and Stow 10K and 14.5K Ball Mounts #34061775-D.

The tongue weight rating of the B and W adjustable ball mount part #BWTS20066BMP is based on which ball you use. If you use the 2 inch ball it has a tongue weight capacity 750 lb and with the 2-5/16 inch it is 1,800 lb.

The B&W Silencer Pad #BWTS35020 is intended to be placed on the shank of one of their Tow & Stow Multi-Ball Mounts like #BWTS10048B so that it acts like a gasket between the collar on the end of the hitch's receiver tube and the…

The B&W Tow & Stow 2-Ball Mount item #BWTS10043B weighs 40 lbs. This ball mount has a 7,500 lbs capacity with the 2" ball or a 10,000 lbs with the 2-5/16" ball. To avoid removing and reinstalling this ball mount after you're…

Since your camper is relatively light, and it comes off during the week, the mid-duty SumoSprings are going to be the best option for your 2015 GMC Sierra 2500: - SumoSprings Rebel Custom Helper Springs #SSR-203-40-2 The #SSR-203-40-2 have a 3,000 lb…

The SumoSprings Rebel Custom Helper Springs #SSR-203-47-2 have a stack height of 6-1/4". These springs will need to have an air gap between the upper and lower spring otherwise you will experience poor ride quality while you are driving without…

At this time (March 2020) Timbren does not have a fit for your 2020 GMC Sierra 2500, but the good news is that the SumoSprings kit part #SSR-203-47-2 that you mentioned is a fit for your truck, provides the same suspension support, and actually would…