Review of etrailer Hitch Locks - etrailer cargo carrier anti-rattle lock - e99047 Video

We several options with similar dimensions although none of them are an exact match to the Truck-Lite 60. The Peterson LumenX LED Trailer Tail Light #M822R-7 matches your length at 7-7/8" but is a little taller at 3-5/8" and has completely…

Yes, the Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR is the correct replacement hitch bolt for the Yakima Exo System #Y82VR. The #Y52FR is the same as part number 8880953.

Hey Naron, the distance from the center of the hitch pin hole to the anti-rattle on the Diversi-Tech Ball Mount #DTSTBM6600-2S is right at 2 inches. I am not sure where you saw that is was 3.5 inches but that is too long.

The Yakima Threaded Hitch Bolts #Y8880131 have a 1/2" -13 thread pitch. I do not see we have any M20 threaded hitch pins or bolts as this is larger than a 3/4" bolt. Most hitch pins are 1/2" or 5/8" in diameter.

Threaded hitch pins are usually brand-specific and match the threads in the shank portion of an accessory item like a bike rack, for example. We have 16 different threaded-bolt locks for 2-inch hitches, shown on the linked page. Thule offers a…

The span of a locking hitch pin like the Blue Ox #BX8858 means the amount of space that can fit between the two walls of the hitch receiver- so yes, basically the distance from the outside wall of one side of the receiver to the other. We have…

You have a couple of options. The best thing to do would be to use a ball mount that fits in your hitch. The reason is that you will not have to worry about a reducer sleeve fitting, any capacity reduction, or adding another component in the system.…

The distance from the center of the #DTSTBM6600-2S hitch pin hole to the center of the anti-rattle pin on top of the shank is 3-1/2".

The distance from the center of the hitch pin hole to the center of the anti-rattle pin on the Flash Silent 2-Ball Mount #DTSTBM6600-2S is approximately 1-3/4".

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

I can confirm that the bolt thread size on the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers #e99047 is M16 x 2. This has a pin diameter of 5/8" with a 2-5/8" span. It is designed for etrailer cargo carriers that fit…

I had our warehouse measure the thread pitch of the Swagman Anti-Rattle Hitch Lock #S64027 you were looking at and it has a 5/8" x 11 thread pitch. We do have the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers #e99047 which has…