Review of etrailer Hitch Adapters - Hitch Expander - e93YR Video

Thanks so much for your order! It looks like you purchased the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" #306-X7369. With this particular hitch, we unfortunately do not have the measurements available for the distance of the…

The only hitch with a 2 inch opening that fits your 2020 Toyota Prius Prime is the EcoHitch part #306-X7369. Most hitch companies only offer 1-1/4 inch hitches for lighter duty vehicles like your Prius but EcoHitch makes all of their hitches 2 inch…

As long as the weight of the bike doesn't exceed the capacity of the bike rack and the combined weight of the rack and bike doesn't exceed the tongue weight capacity of the hitch, and the rack you use is compatible with a Class I hitch, you…

The anti-rattle adapter I recommend is the No-Rattle Trailer Hitch Wedge, part #MPG908. This will work for 1-1/4 inch and 2 inch receivers and is designed to insert into the small gap that may exist on your receiver. You then tighten it up after it…

Thank you for providing a photo of your Malibu and power chair carrier. Use of ANY type of trailer hitch adapter/extender, such as the Brophy #HT5R that you referenced, will have an undesirable side-effect: it will reduce your hitch's tongue…

The Curt Class I Trailer Hitch Receiver #C34UR is designed to fit a Toyota Corolla sedan from 2020 to 2022. This goes for all sedan models and trim levels, including the Hybrid. Though drilling and trimming will be required, it will definitely fit…

We actually have exactly what you are looking for; a 2 inch trailer hitch receiver to replace the 1-1/4 inch factory receiver on your 2021 Volkswagen ID.4: - Curt Trailer Hitch Receiver #C57JR I have added a cut out of the installation instructions…

For your 2022 Toyota Corolla Sedan I recommend the Curt Trailer Hitch Receiver #C34UR. This is a Class I hitch with a 1-1/4" receiver. It has a 200 lb maximum tongue weight for your bike rack and a sturdy, square-tube design. This hitch has a…

I checked with Yakima and for the Exo Swingbase part #Y34VR the correct replacement hitch pin bolt is the part #Y52FR.

The center of the hitch pin hole to the rear of the bumper on the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C65FR is 8". If this does not provide you with enough clearance, and your bike rack can also fit a 2" hitch,…

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…