TorkLift RV and Camper Steps TLA8000 Review Video

Great question! The All Terrain Landing Gear for RV Scissor Steps, #TLA8000, work with most factory scissor steps. Many steps like Brophy Scissor Steps #AS23 use rivets. You are correct - the rivets will need to be drilled out using a 1/4" drill…

Hey Jonathan, the All Terrain Landing Gear for TorkLift GlowStep Scissor Steps for RVs #TLA8000 that you referenced would not add additional height to the bottom of your current Torklift step setup.

Which holes are you talking about specifically on the steps?

Torklift recommends that the mounting bracket height for the TorkLift GlowStep Scissor Steps #TLA7804 be right at 34-1/2 inches.

I've drawn up a little diagram below displaying the dimensions of the TorkLift GlowStep Stow N' Go Mounting Bracket for Truck Bed Campers #TLA7820. If you need anything else please let me know and I'd be happy to help.

I really like the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs #TLA7804-8000 and think they're a great option for your truck bed camper and the bracket has pull pins to allow you to remove the steps…

The big difference is that the part #TLA7804-8000 does not come with a bracket for how it attaches to the truck whereas the part #TLA7834 does. The bracket is for a more permanent install where they'd fold up and store on the vehicle whereas…

If your door entry height (the distance from the ground to the threshold) is 37" and you bracket area (width) is 21-1/2" or greater then the TorkLift #TLA7804 is the correct fit. You can use the #TLA7801 Single Add-On Step to extend your…

Both the Brophy #AS24 and the TorkLift #TLA7804 are easily removed when not in use- and it's actually recommended that you do so. Additionally, they both weigh in around 26-lbs total, so they're easy to move on and off; so they'd both be…

Since the Torklift Glowstep #TLA7804-8000 has an entry height range of 31 to 42 inches your height of 37 inches would work well.

The TorkLift Glow Steps part #TLA7804 would work great for you as they will have a distance of 34-1/2 inches from the mounting bracket to the ground when installed and come with pins that are easily removed from the top of the steps when you need to…

The TorkLift GlowStep Stow N' Go Scissor Steps #TLA7844 is going to extend out roughly 38 inches from where it installs. I say roughly since it's a scissor step and how far the steps extend changes the distance they stick out.