Dimensions Of The TorkLift GlowStep Stow N' Go Mounting Bracket For Truck Bed Campers

Question

Question:

What are the dimensions of the bracket?

asked by: Andy D

0

Expert Reply:

I've drawn up a little diagram below displaying the dimensions of the TorkLift GlowStep Stow N' Go Mounting Bracket for Truck Bed Campers # TLA7820. If you need anything else please let me know and I'd be happy to help.

expert reply by: Kevin C

0

TLA7820 Dimensions
(click to enlarge)

Answer 1

I may have another option but unfortunately the Brophy Camper Scissor Steps #SS04 you have were not designed to be permanately installed and will not work with the TorkLift GlowStep Stow N' Go Mounting Bracket #TLA7820 you mentioned. The…

view full answer...

Answer 2

I looked up a photo of the 2019 Arctic Fox 990 Truck Camper and I see the surround bars you are talking about. You will want to check with the manufacturer to determine the weight capacity of the roof. If the weight capacity can handle a cargo box…

view full answer...

Answer 3

Which holes are you talking about specifically on the steps?

view full answer...

Answer 4

Yes, since the mounting bracket for the TorkLift GlowStep Camper Scissor Steps #TLA7805 can be mounted under your door this will reduce the distance for that last step into your camper. I went out to the warehouse and found that the mounting bracket…

view full answer...

Answer 5

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

view full answer...

Answer 6

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Dimensions Of The TorkLift GlowStep Stow N' Go Mounting Bracket For Truck Bed Campers

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching