Lift Extenders for HappiJac Truck Camper Jack Systems - 6" Lift - Qty 4

Video Transcript for Review of HappiJac Trailer Camper Jack Parts - 6 Inch Leg Extensions - LC182495

Ellen: Hey everyone, I'm Ellen here at etrailer.com. Today we're taking a look at the Lift Extenders for HappiJac Truck Camper Jacks. If you are using your HappiJac in a more lifted truck or something that's going to be a little bit higher off the ground and your HappiJac just isn't able to get the amount of purchase that you need it to, to take your truck bed camper out of your bed, this is going to give you a six-inch extension to attach to the bottom of those jacks so you can drive away without having to worry about everything fitting and everything working right. They're pretty simple, just four extensions here.They do have a convex and then a concave end. Our concave should match up to our bed, so basically that's the one that kind of bows up like a little dish that should go on the top towards our jack and then the bowed out or convex one will go towards the ground. That just helps it adjust a little bit to different levels of pavement or softer ground like if you're on gravel or dirt or something, it just gives it a better connection with the ground.So once we have that in place, we can take our included hardware, drop that down through the bottom of our jack into the top here and then connect everything together.

So we'll have a bolt and a lock nut for each attachment point. There'll be two per extender. So pretty straightforward. These should match up directly with that HappiJac foot, but I'm going to give you some measurements here.These are going to be six inches long. Overall, they're about six and a half inches tall from where it bows out to the top of the lip here.

But because of that design where it kind of bows out and bows in, you really get about six inches of lift. So if we go from the inside edge here to the inside edge there, it's about six inches for this welded portion. The footprint of these it's about three and three-quarters inches across, and then about four and a half inches front to back. They are made in the USA, completely welded construction with a black powder- coat finish so they shouldn't have any issues with rust or corrosion. They'll give you that six inches of lift that you need to get your embed camper off of your truck.

And that's going to do it for our look at the lift extenders for HappiJac truck camper jacks..