Review of TorkLift RV and Camper Steps - Truck Camper Scissor Steps - TLA7844 Video

I may have different installation method for you, but there is not an extended bracket made to push the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7843 away from your camper to clear your bumper. It may be possible to have…

Not following the manufacturer's instructions to the letter will give them an excuse if something were to happen so while I can't recommend drilling the extra holes to ensure it's safely mounted, it's the only way that the steps will…

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7834 only comes in the silver color with the black brackets. The overall folded dimensions are 14" High x 23-1/4" Wide x 11" Deep which includes the bracket and…

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear, #TLA7834 is for an entry height of 31" - 42". Find the mounting spot for the bracket on your vehicle and measure from that point. The #TLA7835 part number is for height of…

The big difference is that the part #TLA7804-8000 does not come with a bracket for how it attaches to the truck whereas the part #TLA7834 does. The bracket is for a more permanent install where they'd fold up and store on the vehicle whereas…

The TorkLift GlowStep Stow N' Go #TLA7844 weighs just over 30 (about 32) lbs by itself. The TorkLift GlowStep part #TLA7804 and part #TLA7504 both weigh a little over 20 (about 22) lbs each.

The TorkLift GlowStep Stow N' Go Scissor Steps #TLA7844 is going to extend out roughly 38 inches from where it installs. I say roughly since it's a scissor step and how far the steps extend changes the distance they stick out.

While we do not have a video of these steps being specifically installed on your camper I took a look at the instruction manual, which is also linked, and there is a method for installing these steps on a camper that does not have a bumper. You would…

It sounds like you have factory tracks on your Lance 850 camper. While you are correct that those quick mount legs #RRRLT600 or the #RLTP-2 fit the tracks, we do not have any long enough crossbars to accommodate tracks that are 96" apart. the…

When fully extended, the Brophy Aluminum Scissor Steps, #AS24, will have a depth of approximately 3 ft and an overall height of 39 inches (see photo). The mounting bracket that is included with the steps is pretty universal, so it could be mounted to…