Review of Maxxair - RV Vents and Fans,Enclosed Trailer Parts - MA00A03550K Video

The switch on your wall is only turning the power on and off for the fan. With a powered lift there wouldn't really be a way to tap into the function and wire it to a switch to make it easier to access. The only option would be to replace…

The replacement part you need is the Replacement 12 Volt Heating Pad For Thomas Payne RV Theatre Seating, part #LC38UD. I have included a product description link below.

I apologize for your issues with your heating pads! The Replacement 12 Volt Seat Heating Pad for Thomas Payne RV Theatre Seating #LC38UD is the same pad as the 354491. The 354491 is the Lippert part number and the #LC38UD is the part number here at…

The MaxxAir MaxxFan Plus Roof Vent part #MA00-04751KSX is designed to replace an existing roof vent fan. Therefore, it does not come with everything needed for installation. The extra items you will need are as follows: Key Wall Control part…

Knowing the actual model number would be best so as to confirm you are ordering the correct part but, if you have the the MA00-04751KSX then we have the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents, #MA39FR.

Since you have the exhaust only model the correct replacement circuit board is the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Exhaust Only Fan #MA39FR.

We've actually had this one asked before and have consulted with MaxxAir. Even though you can technically install the MaxxFan Deluxe Roof Vent #MA00-06401K wired to a separate switch, it is not recommended. The reason for this is that their fans…

I do have a solution for you that doesn't involve replacing your entire unit, but the Fan-Tastic Vent Roof Vent #FV803350, does not have a receiver built into it, so it doesn't have the option to operate through a remote. Therefore, using its…

I wasn't able to reference this part number but we do carry a few wall mount switches for MaxxAir Vent Fans, the part #MA59FR and part #MA00A03550K. If yours look like either of these two options then they will work great for you but they are the…

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

Your MaxxFan Plus Roof Vent #MA00-04500K uses the Remote #MA00A01150K. The Key Wall Control #MA00A03550K is not compatible with your fan.

There isn't a slightly different version of an RJ-11 cable, the port will accept a standard RJ-11 cable in the Replacement Key Wall Control For MaxxFan Plus and Deluxe - 4 Key #MA00A03550K. What you can use is the Communication Cable #34279523. I…