Torklift Glowsteps For Truck Campers Plus Add-On Step

Question

Question:

The door threshold height on our truck camper is 37 inches. Is this model TLA7804 the correct one for it? Is the mounting bracket included with the with the stairs, or is it sold separately? If I need slightly more height for the stairs can I add baskets or another step?

asked by: D. B

0

Expert Reply:

If your door entry height (the distance from the ground to the threshold) is 37" and you bracket area (width) is 21-1/2" or greater then the TorkLift # TLA7804 is the correct fit.

You can use the # TLA7801 Single Add-On Step to extend your reach.

expert reply by: Les D

0

Answer 1

The big difference is that the part #TLA7804-8000 does not come with a bracket for how it attaches to the truck whereas the part #TLA7834 does. The bracket is for a more permanent install where they'd fold up and store on the vehicle whereas…

view full answer...

Answer 2

Both the Brophy #AS24 and the TorkLift #TLA7804 are easily removed when not in use- and it's actually recommended that you do so. Additionally, they both weigh in around 26-lbs total, so they're easy to move on and off; so they'd both be…

view full answer...

Answer 3

Since the Torklift Glowstep #TLA7804-8000 has an entry height range of 31 to 42 inches your height of 37 inches would work well.

view full answer...

Answer 4

I really like the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs #TLA7804-8000 and think they're a great option for your truck bed camper and the bracket has pull pins to allow you to remove the steps…

view full answer...

Answer 5

The scissor step bracket has two L shaped pins on the inside of the angle iron. Measure the center to center distance between the two pins. You will want to drill two 7/16 inch holes into the tailgate that are the same distance apart as the pins that…

view full answer...

Answer 6

What you're going to want instead is the: -Brophy Tailgate Scissor Step Mounting Bracket #TSSB. This mounting bracket will work with your AS04 scissor steps, as well as the AS02, AS03, AS05, AS23, AS24, AS25, SS02, SS03, and SS04 steps. The…

view full answer...

Answer 7

The bracket of the Aluminum Scissor Steps #AS04 that you referenced stays attached to the camper, but the steps themselves get removed while traveling. Check out the review video I attached for these steps as well.

view full answer...

Answer 8

If you're having trouble getting access into the bumper when installing the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7834 you'll simply need to drill an access hole large enough to fit the bolts through and then you can use a…

view full answer...

Answer 9

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7834 only comes in the silver color with the black brackets. The overall folded dimensions are 14" High x 23-1/4" Wide x 11" Deep which includes the bracket and…

view full answer...

Answer 10

We do indeed offer a Torklift Scissor Step with four steps, the part number is #TLA7804.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...