Customers compare 3015-P to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
When installing a brake controller in a 2004 Chevy Silverado 2500HD with a harness like the Tekonsha part #3015-P there are a few connections under the hood of the truck that need to be made to activate the brake controllers wiring. I attached a…
view full answer...You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a…
view full answer...The Atwood RV Carbon Monoxide and Propane Gas Detector part #AT36681 will be an excellent replacement for the ProTECHtor LP Gas Detector. The Atwood RV Carbon Monoxide and Propane Gas Detector has a seven year life span which is pretty standard.…
view full answer...The great thing about landing gear systems is that the parts are mostly standardized so the Lippert Components Venture 5th Wheel RV Landing Gear Motor part #LC142178 should work just fine on a Cedar Creek Silverback.
view full answer...I believe you are asking if there is a brake controller that you can just plug into your 2003 Chevy Avalanche that has the factory 7-way, and the answer is yes. For an '03 Avalanche with the factory 7-way, the only thing you will need is…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...From what I could find on your Carefree OneTouch, it looks to be a discontinued product. We do have the Solera 12V Power RV Awning Conversion Kit #LC434724 which is designed to replace or upgrade the existing support arms on a Carefree awning. But it…
view full answer...More often than not, the connections under the hood of your 2010 Chevrolet Silverado 1500 will need to be made to complete the installation for a brake controller. I have heard of some occasions where these connections were made at the factory, but…
view full answer...I was able to find that your 2003 Chevy Silverado with a Duramax diesel engine has a towing capacity of 12,000 lbs.
view full answer...If your 2003 Chevrolet Silverado 2500 HD has the factory installed hitch and a 7-Way connector, then all of the wires for the brake controller have been run. The factory brake controller port is located in the black box underneath the dash on the…
view full answer...I do not know which controller brand and model you have or which wring adapter you're using. But for reference I linked our range of controllers, such as the Prodigy P3 #90195, confirmed to work with the 2005 Sierra with factory 7-way. This…
view full answer...As long as your 2006 Chevrolet Silverado 1500, has the factory 7-Way tow package wiring at the rear of the vehicle all you will need is the Draw-Tite Brake Controller with Wiring for the 2006 Chevrolet Silverado, item #5504-3015-P, which includes the…
view full answer...