Review of Yakima Replacement Adapter Sleeve - 1-1/4 to 2 inch - 8880519 Video

The Yakima RidgeBack 4 Bike Rack #Y02458 has a SpeedKnob at the bottom that is designed to spin freely when it's locked and have the friction needed to loosen/tighten the bike rack when it's unlocked. It sounds like the opposite is…

If you use the #HT02 adapter to convert a Yakima Holdup 2 Bike Rack #Y02445 designed for 1-1/4 inch hitches so that it can be used in a 2 inch hitch you would not reduce the capacity of the rack. You would be able to carry 2 bikes with the setup…

In order to converter a Yakima HoldUp for 1-1/4" to a Yakima HoldUp for 2" you will need the Replacement Tongue for Yakima HoldUp Bike Racks part #8880580 and the Replacement Hitch Bolt part #Y8890200. The lock core housing can be reused.

In order to use the Yakima HoldUp EVO 2 Bike Rack for 1-1/4" Hitches #Y02480 with a 2" trailer hitch receiver you will actually need to swap out the current tongue with part #8880826. The HoldUp doesn't have provisions for an adapter…

The adapter I recommend using to convert the 1-1/4" shank on the Yakima Dr. Tray for use with a 2" hitch is the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver part #HT02. This is really the only way to use this rack with a…

I recommend installing the Thule WingBar Evo roof rack on your 2024 Toyota RAV4 with the raised roof rails. You will simply need the Crossbars #TH711420 and the Feet #TH710401 to attach this to your roof. I do recommend getting a Lock Set #TH450800…

I have an option for you, but no, the #8880519 will not work on the shank of your Yakima bike rack that you sent me a picture of. The only option for you is a reducer that installs in your 2" trailer hitch receiver like the #HT02, and then will…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Replacement 2" Hitch Adapter Sleeve for Yakima TwoTimer Bike Rack #8880519 is only compatible with the TwoTimer. Yakima did make a replacement 2" adapter for the DoubleDown, but it has been discontinued. Although this will not work for…

I have a solution for adapting your Yakima Holdup #Y02445 for 2" hitches, but the Yakima Holdup is not compatible with the #8880519 adapter sleeve since this sleeve is meant for use on the Yakima TwoTimer #Y02468. Adapter sleeves can be tricky…

The Yakima HoldUp Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount, part #Y02443, will work with the trailer hitch on your 2021 Volkswagen ID 4. Provided your trailer hitch is a Class III trailer hitch. If you do not have a trailer hitch, we do…

Yes, the etrailer.com Trailer Hitch Receiver #E98848 is deep enough for the Replacement 2" Hitch Adapter Sleeve #8880519 to fit.