Trailer Hitch Installation - 2018 Nissan Frontier - Draw-Tite Video

The Rhino-Rack Roof Rack System #Y02-490B referenced in your question is confirmed to fit your 2008 Toyota Tacoma with the 5-1/2 foot bed and will work great on the canopy. This system is specifically designed to attach to camper shells like what…

Yes the Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-490B will allow for the slight contour of your truck topper. The track length is as you stated 63" so you have to have at least that amount but if you're slightly…

On the Nissan Frontier and other Nissan vehicles, if the vehicle did not come with a factory tow package it will not have a functioning wiring harness even if one, like #118263, is added. There will be relays that will need to be inserted to make…

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

We actually have an FAQ article that explains exactly what you need to do to add a 7-Way to a 2008 Ford E-series van with a factory 4-Way wiring harness. I have linked it for you. There is no simple plug-in harness that will work but installation of…

The best way to decide which class cooler you need is to take a look at what you will be towing and where. If you will be towing a light load, less than 2,000 pounds, in flat driving conditions, your vehicle will do fine with a Class I. If you will…

The Tekonsha Brake Controller Wiring Harness, #3050-P, that fits the 2004 and newer Nissan Titan plugs into a harness that is already on the vehicle. This harness will be located under the dash, to the left of the steering column, taped to another…

The weld nuts in the frame on a 2010 Nissan Frontier are indeed M12 x 1.25 x 35mm which is what the Draw-Tite Max-Frame Trailer Hitch Receiver part #75282 will use. I'd simply pick up a 12 mm x 1.25 Tap locally and clean the holes out…

We do indeed have the installation bolts available for your newly obtained trailer hitch to mount to your 2012 Nissan Frontier with part #RHK. What you will need to do is simply type in the model number for your hitch into the text box provided on…

The Draw-Tite Max-Frame Trailer Hitch Receiver #75282 will have the following bolt hole dimensions for your 2015 Nissan Frontier. The Bolt holes from drivers side to passenger side frame rails are 43-5/8" on center. The holes running from front…

I can help you with the process of replacing the Tail Clamp Assembly #EX1035 for your Extang Solid Fold or Solid Fold 2.0 tonneau cover. The replacement process will be different depending on if your existing cover is the Solid Fold or the Solid Fold…

The Draw Tite hitch part #75282 is a confirmed fit for your 2018 Nissan Frontier and would be a great fit. I attached an install video for this hitch on a 2018 Frontier just like yours.