Review of Curt Hitch Anti-Rattle - Standard Anti-Rattle - C69HR Video

The Air Lift Air Helper Spring Cradle #AL59DQ is made of a light-weight durable resin. I would expect them to outlast the air bags but if for some reason they don't they come with a limited lifetime warranty.

Yakima has a few different anti-rattle threaded hitch bolt designs and the one you want for your Yakima EXO SwingBase Swing Away Hitch Extender #Y34VR is part #Y52FR on our site. This is the same as the 8880953 you mentioned, it just has our part…

The Class III Curt trailer hitch part #C13418 that you referenced has a 5/8 inch diameter hitch pin hole which is standard for the 2 inch hitch size. So the Curt anti-rattle device 22323 part #C69HR would fit.

I checked with Yakima for you and can verify that your 2011 Lexus RX 350 with a factory roof rack will absolutely be compatible and allow you to mount the Yakima GrandTour Rooftop Cargo Box - 16 Cubic Ft #YA74FR. The GrandTour is a superb choice…

We carry a bunch of cargo nets, but they are meant for use with cargo baskets and cargo carriers, not cargo boxes. That being said, the Yakima GrandTour Rooftop Cargo Box #YA74FR comes with 4 Integrated anchor points let you secure cargo inside the…

The Reese Sway Control Kit part #83660 can be bolted to the frame of your enclosed trailer. And if you use the ball mount bracket part #RP26003 you wouldn't have to have a tab welded to your ball mount either.

Yes, the Reese Sway-Control Bracket #RP26003 that you referenced will fit with a 2-5/16 inch hitch ball. The confusion may be that this is designed to fit 2 inch ball mounts. That means ball mounts designed to fit 2 inch hitches. As long as the…

If the Yakima RidgeBack Bike Rack was just purchased then most likely the wedge is not tightened correctly and you just need to redo that portion of the install process. However, if this is an older bike rack then most likely the cause of this is…

You can definitely make any modifications you'd like to your Yakima HoldUp EVO, part #Y02479. However, you should know that this will void your warranty, and so I cannot recommend it. If you choose to drill another hole and use the Replacement…

The Yakima HitchLock for Yakima Hitch Mounted Bike Racks #Y07235 attaches to your anti-rattle bolt and keeps your bike rack locked to your hitch. An even more secure setup is the Yakima LockUp Hitch Lock and Cable Lock #Y07238. This kit not only…

The Draw-Tite Max-Frame Trailer Hitch Receiver #76227 does weigh 30lbs. The widest point on the receiver is 40-1/4" and it has an overall height of 13-1/4".

It sounds like you are asking about the distance from the center of the hitch pin hole to the back of the shank of the ball mount that slides into the hitch. That distance is 2-1/2 inches. I attached a picture that shows this dimension as well.