Can a Weight Distribution with Sway Control System be Used on Lifted Truck

Question

Question:

Hello, I have a lifted truck with a 6 inch lift. Is it possible to use your anti sway system on a truck with a lift like mine?

asked by: Samuel G

1

Helpful Expert Reply:

You can certainly use a weight distribution system on your lifted truck. The key will be to find a weight distribution shank that offers you enough drop to be able to tow your trailer level. Weight distribution systems are available without a shank so that you can choose the one that works best for you.

For example, if you have a trailer that has a loaded and ready to tow tongue weight somewhere around 1,000 pounds, a system like the Equal-i-zer Weight Distribution with 4-Point Sway Control System # EQ37121ET is a great option. I recommend the Equal-i-zer system because the 4-point sway control system works well and has less components that some similar system and the Equal-i-zer will not require you to drill into your trailer's frame. This system does not include the weight distribution shank so you can choose the one with the correct rise/drop for your trailer. Say you needed a 6 inch drop in order to tow the trailer level, the Equal-i-zer WD Shank # EQ90-02-4340 that offers a maximum 6 inch drop would work well.

I've attached links that will show you all of the weight distribution shanks and the weight distribution systems that come without shanks that are available.

If you'd like to let us know your trailer's loaded and ready to tow tongue weight and the drop necessary to tow your trailer level, we will be happy to make a more specific recommendation for you.

expert reply by: Victoria B

1

Answer 1

The Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW #C17062 is not available without the shank. For your raised truck, you can interchange companies for the shank head, however the companies may void your…

view full answer...

Answer 2

Yes we can! The correct hitch for the 2024 Toyota Highlander Platinum is the etrailer Class 3 hitch #e75ZR. We double checked with the manufacturer and confirmed that it will indeed fit the Platinum model. The etrailer #e75ZR hitch is considered a…

view full answer...

Answer 3

Thanks for the pictures! A weight distribution hitch is recommended based off of the tongue weight of your trailer and is typically between 10% and 15% of your trailer's total weight. 580 lbs seems extremely low for a 7,600 lbs trailer. Usually…

view full answer...

Answer 4

The tongue weight capacity of the Curt weight distribution shank part #C17132 that you referenced is 1,500 lbs. I believe that is your only question but if you have any other parts from your WD system that needs to be replaced let me know and…

view full answer...

Answer 5

Where to start with your wiring harness depends on what available connectors you have under the bumper of your 2020 Ford F-150 and also what trailer connector you're looking to add on your truck. If your truck already has the square shaped…

view full answer...

Answer 6

The bracket being removed around the 9:50 part of the installation video for the etrailer Hitch item #e75ZR does not get reattached. You need the hole that the bracket attaches to secure one of the bolts that holds the hitch to your 2022 Toyota…

view full answer...

Answer 7

You sure can! Weight distribution shanks are not brand specific, you will just need to make sure you use a shank that is the same style as there is two different styles. Based on your picture you will need the #EQ34FR that fits the 2-1/2"…

view full answer...

Answer 8

The typical shank that comes with the Equal-i-zer Weight Distribution System #EQ37120ET has a 7" rise and 3" drop measuring 12" overall. For a shank that fits your 2-1/2" receiver to go with the #EQ37121ET I recommend the…

view full answer...

Answer 9

Thank you for the picture! The overload spring that the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-HD is referring to is located on top of the leaf spring pack. Based on the picture you provided, you will be able…

view full answer...

Answer 10

There sure is! Based on the picture you provided you are using an adjustable ball mount that does not use a standard hitch ball with a nut on the bottom. Since that is the case you will not be able to use friction sway control, as it needs to be…

view full answer...

Answer 11

The instructions for the orientation of the Tuson Sway Control part #335TSC-1000 when installed are very specific. The red dot on the label has to be at the trailer's center line and the arrows on the label that say "Mount with this side…

view full answer...

Answer 12

I would be happy to help clarify the confusion and set your 2022 Toyota Highlander XSE up with a hitch for your bike rack. The etrailer Trailer Hitch Receiver item #e75ZR does fit your Highlander XSE. This hitch is custom fit and bolts directly to…

view full answer...

Can a Weight Distribution with Sway Control System be Used on Lifted Truck

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching