Thickness of Wall of Patriot Hitches PH67SR

Question

Question:

Can you kindly advise what is the wall thickness of the square tube. It looks like it is 1/8 inch but I am not sure. Thanks in advance.

asked by: Albert

1

Helpful Expert Reply:

The thickness of the wall of the 7,000 lb-rated Patriot Hitches Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 11" Rise/Drop # PH67SR is 3/16".

expert reply by: Kyle S

1

Answer 1

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 5

The Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR in the 7,000lb capacity is the only capacity we currently carry. For 10,000lbs from Patriot Hitches we have their Captain #PH34FR. We do have the Gen-Y Shank #325-GH-304 rated for…

view full answer...

Answer 6

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

view full answer...

Answer 7

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…

view full answer...

Answer 8

The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility…

view full answer...

Answer 9

From the top of the B and W Tow and Stow part #BWTS10043B down to the bottom of the unused ball when it is in it's lowest position measures 14 inches. The 7 inch drop version part #BWTS10040B instead has this distance at 12 inches.

view full answer...

Answer 10

The StabiliTrak that's built into your GMC Sierra does the same thing that the Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV does, so you'd have to disable the built in TSC to use it. Since they're the same thing,…

view full answer...

Answer 11

I recommend using the Curt Lock Set #C23556 for your Curt Adjustable 2-Ball Mount #C99NR. This comes with a lock for the hitch receiver and one for the ball mount platform. Even though your platform uses 2 pins, only 1 locking pin is needed to secure…

view full answer...

Answer 12

Hey Buddy, so the Fastway Adjustable Ball Mount part #DTSTBM6825-2S is a really great choice for the 2-1/2 inch hitch of your 2021 Ford F-250 which is going to be very solid in your hitch due to it's built in anti-rattle device that is easy to…

view full answer...

Thickness of Wall of Patriot Hitches PH67SR

Product Page this Question was Asked From

Continue Researching