D-Ring Bumper Mounts for Poison Spyder Bumper on 2015 Jeep Wrangler Unlimited

Question

Question:

Hi, I purchased a Roadmaster All terrain tow bar with the D ring bracket kit. I ordered the wrong size but also realized the angle with my lifted Jeep would be too high. I figure the bracket is a good amount lower than the D ring mount. I have a Poison Spyder aftermarket front bumper. What bracket kit should I purchase? Mine is the white Jeep. Thanks,

asked by: Ted

0

Expert Reply:

That's a cool Jeep and the correct adapter for your 2015 Jeep Wrangler Unlimited with a Poison Spyder front bumper are the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick # RM-035, which we know to be the correct size for this bumper.

In regards to the angle of your Jeep's mounts being too high, what you will need is called a High-Low adapter. To choose the correct High-Low adapter you will need to start by measuring the height from the ground to the center of the trailer hitch on your motorhome. Then measure from the ground to the center point of the mounts where your tow bar attaches on your Jeep.

If the trailer hitch on your motorhome is higher, then the difference in the measurements is the amount of drop you need. If the tabs/base plates are higher, the difference is the amount of rise you need; the correct high-low adapter will put you within 3" of level either way. I have added a link to our help article on High-Low adapters which I recommend checking out. Once you determine the rise or drop you need, you can choose from these available adapters:

- Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 2" Rise/Drop # RM-072-2
- Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop # RM-048-4
- Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 6" Rise/Drop # RM-048-6
- Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 8" Rise/Drop # RM-048-8

expert reply by: Kyle S

0

click to enlarge

Answer 1

No, having play in the your Roadmaster D-Ring Mount Adapters #RM-035-1 can cause friction which will lead to them failing. You'll want to measure the thickness of the your D-Ring mount and order accordingly. based on the picture you provided it…

view full answer...

Answer 2

I've dealt with this issue in the past and Roadmaster stated that there shouldn't be more than 1/8" gap, otherwise you'll get two much play and can start to get friction. Since you're right at 1/8" with the #RM-035-1…

view full answer...

Answer 3

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 4

The Roadmaster D-Ring adapters like the part #RM-035-1 can be used with the Demco tow bars.

view full answer...

Answer 5

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

view full answer...

Answer 6

The Smittybilt XRC Gen2 bumper on the 2020 Jeep Wrangler has 3/4" thick d-rings so you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part #RM-035 to tow with the D-rings on your bumper. Smittybilt is…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

D-Ring Bumper Mounts for Poison Spyder Bumper on 2015 Jeep Wrangler Unlimited

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching