Correct Replacement Wall Switch for MaxxAir Vent Fan

Question

Question:

Hello, I am looking for a wall switch for the MaxxAir fan in the bathroom of my motor home. I have been told the part number is #00A3650K, but I have been unable to confirm. Do you carry this switch?

asked by: Kevin B

0

Expert Reply:

I wasn't able to reference this part number but we do carry a few wall mount switches for MaxxAir Vent Fans, the part # MA59FR and part # MA00A03550K. If yours look like either of these two options then they will work great for you but they are the only options we offer at this time.

If you can provide me with the model number of the actual unit I may have a better answer for you but again, if your controller looks like either of the above then chances are it will work great with your unit.

expert reply by: Conner L

0

Answer 1

Yes, you can use the Furrion Chill HE RV Air Conditioner System - Manual - 15,000 Btu - White #FR92PR to replace your old 68RV15102A.

view full answer...

Answer 2

Most slides have EPDM rubber roofs but because EPDM is rubber it requires treatment each year to keep it soft and prevent shrinkage. You could replace it with TPO which is another synthetic rubber that will last longer than the EPDM. The smallest…

view full answer...

Answer 3

Yes, the Replacement Handheld Remote #MA00A01150K is a compatible replacement for your MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-05100K.

view full answer...

Answer 4

To connect the Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent #MA59FR you will need - if you don't have it - the Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel #MA69FR. You'll need to route that cable…

view full answer...

Answer 5

The Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is meant to be a direct replacement however not all the necessary hardware is included. The remaining items you'll need is the Key Wall Control part #MA00A03550K,…

view full answer...

Answer 6

You can use an RJ11 cable with the #MA59FR but some of the functions might not work properly. We've found that sometimes some of the functions will work backwards. What your best option would be is the communication cable part #MA69FR.

view full answer...

Answer 7

For your Maxxair Model 4951KSC, you can use the MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955002. Even though this cover only has 10-1/4" of interior height, your MaxxFan will sense the cover when auto-opening, and stop opening, that…

view full answer...

Answer 8

The MaxxAir MaxxFan Plus Roof Vent part #MA00-04751KSX is designed to replace an existing roof vent fan. Therefore, it does not come with everything needed for installation. The extra items you will need are as follows: Key Wall Control part…

view full answer...

Answer 9

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 10

It looks like you have the MaxxAir MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 4 Speed - White #MA00-04751KSX. The unit sounds like it is malfunctioning and this could be due to the rain sensor #MA34FR. It sounds to me like the sensor is…

view full answer...

Answer 11

You reported that you cannot use the remote on your MaxxFan 4700K to put the vent cover up and down. Let's troubleshoot. Put some new batteries in your remote. Ensure that the display comes on. Verify if your vent cover now works. Verify if other…

view full answer...

Answer 12

What I think you are asking is if either the Replacement Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent, #MA59FR or, the #MA00A03550K can be used with a MaxxFan - 00-04951KSX. The #MA59FR controls the 10-speed fan, electric lift lid,…

view full answer...