Remote Control Compatible With MaxxAir MaxxFan 4500K

Question

Question:

will this remote work with a maxxfan 4500k s/n 1904-4500k-0909

asked by: Tony K

1

Helpful Expert Reply:

Your MaxxFan Plus Roof Vent # MA00-04500K uses the Remote # MA00A01150K. The Key Wall Control # MA00A03550K is not compatible with your fan.

expert reply by: Bud M

1

Answer 1

To connect the Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent #MA59FR you will need - if you don't have it - the Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel #MA69FR. You'll need to route that cable…

view full answer...

Answer 2

What I think you are asking is if either the Replacement Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent, #MA59FR or, the #MA00A03550K can be used with a MaxxFan - 00-04951KSX. The #MA59FR controls the 10-speed fan, electric lift lid,…

view full answer...

Answer 3

Based on the part number of your motor the correct circuit board would be the part #MA10A21275K.

view full answer...

Answer 4

For your MaxxFan part #MA00-07500K that you referenced the correct replacement motor is the part #MA10-20968 that you referenced. The motor comes with connectors that will attach to the circuit board that controls the motor which is part #MA10A21275K…

view full answer...

Answer 5

It is possible the Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents #MA10-20968 will work as a replacement for the 10-20965 motor, but it actually depends on the model of MaxxAir fan you have. It is likely this will…

view full answer...

Answer 6

A 4-wire phone cable is not something that we are aware can be used instead of the Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel #MA69FR. This is what you would need as opposed to a phone cable for models 00-04500K,…

view full answer...

Answer 7

To properly install The Replacement Key Wall Control For MaxxFan Plus and Deluxe - 4 Key #MA00A03550K you will need The Communication Cable #34279523. I attached a review video link below.

view full answer...

Answer 8

While I don't have direct instructions about replacing the Lift Motor #MA10-20270, I can tell you how to gain access to the lift motor. You want to start by removing the screen on your MaxxFan. This is done by rotating the 4 locking tabs 180…

view full answer...

Answer 9

I spoke with the manufacturer and based on your issue the gears are most likely stripped out and can't sense that its reached the end so you'll need the Replacement Lift Motor for Maxx Fan Plus Roof Vent #MA10-20270. If this doesn't solve…

view full answer...

Answer 10

I spoke with MaxxAir about the issues you are having with your MaxxAir MaxxFan Roof Vent and they informed me that the gears inside the lift motor have gone bad so you will need to replace this with the Replacement Lift Motor for Maxx Fan Plus Roof…

view full answer...

Answer 11

Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF is what you want for your MaxxAir Deluxe Fan if it is a power lift or the Replacement MaxxAir Roof Vent Manual Lift Operator #MA10-20281K-3CF if it…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Remote Control Compatible With MaxxAir MaxxFan 4500K

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching