Roadmaster Hitch Adapters - Dual Hitch Adapter - RM-077-6 Review Video

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

I checked with our manufacturers for you, and was able to verify a fit for a trailer hitch on your 2024 Chevy Trax. The hitch is made by Curt and the correct part number is the following: - Curt Trailer Hitch Receiver #C75VV If you'd like to add…

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

Thank you for providing those helpful measurements. With the 8" difference I would go ahead and choose the Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise #RM-077-8 over the #RM-077-6. Loading it won't make much of a…

Yes. The cable you're referring to on the Swagman Current Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Frame Mount #S64678 is designed to secure the bikes to the rack. I've linked our review video of this rack and around…

Yes the Roadmaster Dual Hitch Receiver Adapter #RM-077-4 can be used with a flat towing setup like you have currently to tow your Fiat 500.

Yes the Roadmaster dual hitch adapter part #RM-077-6 that has a 6 inch drop hitch opening as well as a higher one that you could use for your bike rack would work great for you. This adapter was designed for basically your exact situation where the…

Yes the Swagman Current part #S64678 can be used with step thru frame e-bikes. I attached a picture we go from a customer that shows it carrying an e-bike with a step thru frame and the hook used is the long hook.

The 2 dual hitch adapters that you want to look into are the Roadmaster options because they were designed for the exact reason for what you are wanting to do. Part #RM-077-4 has a 4" Rise/Drop while part #RM-077-2 has a 2-1/4" Rise/Drop.…

I do have an option for you but the Roadmaster Direct-Connect Base Plate Kit part #RM-521448-5 is designed to be used with the factory front bumper on a 2018 Jeep JK Wrangler only. Unfortunately, Roadmaster does not test this base plate kit with…

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…

If you try to use two regulators you will most likely have too low of pressure you run your propane accessories. We had a customer come back who tried to use a RV gas grill that was regulated from a propane source that was already regulated and the…