How To Determine If Timbren Trailer Suspension Enhancement # TTRA1702 Will Fit Single Axle Trailer
Question:
I have a pizza oven trailer that has a lot of bounce it. The dome on my first oven collapsed due the bouncing. Can I put the ttra1702 on the side of the axle to help reduce the bouncing? It’s about 3.6 inches clearance from top to the leaf spring on each side of the axle.
asked by: Lee T
Expert Reply:
The Timbren Trailer Suspension Enhancement System # TTRA1702 is 2-3/4" tall with no load on the spring. This particular system is designed to mount to the frame with the included bracket(see image) and when the suspension compresses the axle will push into the spring. You will need to measure the distance from the top of the axle to the frame to determine if this is an option for your trailer. It is okay to have the spring touching the axle or being compressed up to roughly 1/2". If your axle is much closer or further please let me know and I can suggest another option.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs
- Trailer Leaf Spring Suspension
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Rubber Springs
- 1000 lbs
- Single Axle
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs
- Video: Timbren Trailer Suspension - Leaf Spring Suspension - TTRA1702 Review
- Q&A: Compatibility of Timbren Suspension for Light Duty Trailers on 1957 Cardinal Travel Trailer
- Shop: Suspension Enhancement
- Shop: Timbren Silent Ride Suspension for Single Axle Trailers w/ 2-3/8" Round Axles - 2,000 lbs
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: Trailer Hitch
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Windshield Wiper Blades
- Search Results: timbren trailer
- Shop: B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
- Shop: etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Shop: Clevis Adapter for B&W Tow & Stow 2-1/2" Ball Mounts - 14,500 lbs
- Search Results: b&w clevis
- Video: Review of Timbren Trailer Leaf Spring Suspension - Leaf Spring Enhancement System - T46GR
- Q&A: Troubleshooting Trailer Chucking, Jerking, and Tugging on Light Utility Trailer Carrying Two ATVs
- Search Results: 500lb leaf springs
- Search Results: 1000 lb leaf springs
- Search Results: license plate lights
- Video: etrailer E-track 5 Gallon Bucket Holder Review
- Video: Lets Go Aero Anti-Rattle Hitch Receiver Lock Review
- Video: Review of Gen-Y Hitch Hitch Anti-Rattle - Anti-Rattle Clamp 2 Inch Hitch Receiver - GY88XR
- Video: Brophy U-Bolt Stabilizer Clamp Review
- Search Results: anti rattle
- Search Results: hitch grip
- Q&A: Recommended Timbren Suspension for Trailer With Roughly 1000-lb Load
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Stability Plus Stabilizer Helper Springs Review
- Q&A: Will Timbren Trailer Suspension Enhancement System Work With Concession Trailer
- Q&A: Can a Damaged Torsion Axle Be Replaced with Timbren Axle-Less Suspension
on Trailer Leaf Spring Suspension
